Tech Tip:Axe Lingo Made Easy - Part I

Your guide through the electric guitar jargon jungle

By Dan Day, Musician’s Friend Senior Staff Writer


You’re reading this because you’re shopping to buy your first electric guitar, or buying it for someone else, or you’ve been shopping for years but were never quite sure what terms like “radius,” “nitrocel- lulose,” and “coil-splitting” really mean. Too often experienced musicians forget to “remember what it’s like not to know,” and we use special terms and jargon as a shorthand or code and don’t realize not everyone’s tuned in. So this article is for you. I went through one of the recent Musician’s Friend catalogs and highlighted terms that I thought might need definition, clarification, or more explanation. Let’s start with the first term from the title of this article:


AXE: Slang for musical instrument, probably originated with jazz musi- cians, especially saxophone players (sax, axe, get it?). Rock musicians started using the term for guitars, even acoustic guitars, in the ’60s.


PICKUP: The electrical device on an electric guitar that acts as a transducer. In other words, it converts the vibrational energy of guitar string into electrical impulses. “Pup” is a shorthand term for pickup.


COIL: The part of a pickup that has electrical wire wound around a bob- bin to make a coil of wiring. The number of turns of wire affects the output of the pickup. High-output pickups used in heavy rock styles are typically overwound.


SINGLE-COIL: Single-coil pickups produce a bright, cutting tone rich in higher harmonics. The simplest versions—still found on many guitars and preferred by many players—produce an audible 60-cycle hum when in the presence of certain types of lights, transformers, and other electrical fields.


HUMBUCKER: The humbucking pickup has two wound coils next to each other that are wired in reverse polarity. This eliminates or reduces most electrical hum that single-coil pickups are prone to.


COIL-SPLITTING: Produces a single-coil tone from a humbucker pickup by routing the electrical signal from only one of a humbucker’s two coils. Sometimes mistakenly referred to as coil-tapping, which takes the output of a pickup from a different location on the pickup’s winding to produce a different tone.


ALNICO MAGNET: Alloy of aluminum, nickel, and cobalt. Used for magnets in pickups. Alnico 2 produces a sweet, traditional tone, while Alnico 5 (also called Alnico V) is a little stronger and produces a brighter, hotter tone.


CERAMIC MAGNET: Used in guitar pickups to produce a hotter output than alnico magnets because ceramic magnets have a stronger magnetic field.


FRETBOARD RADIUS: The measure of the curvature of the top of the fretboard from edge to edge is often incor- rectly referred to as the “neck radius.” The smaller the radi- us (e.g. 7-1/2") means a more curved fretboard that’s more comfortable for making chords. A higher radius such as 10" is flatter which allows extreme string bending with- out the note “fretting out” that can occur with a smaller (more curved) radius. A compound-radius fingerboard curves more dramatically at the nut for easy chord- ing and flattens out as it approaches the neck joint for low-action bends without fretting out.


SCALE LENGTH: The measured distance of the vibrating string length between the nut and the saddle. The 25-1/2" scale length found, for example, on the Fender Stratocaster was taken originally from the standard scale length for steel string acoustic guitars. This scale length provides high tension and thus a more trebly sound. Since it’s slightly more difficult to play guitars of this scale, it is common for guitarists to use lighter strings on 25-1/2"-scale instruments. The shorter 24-3/4" scale on guitars like the Gibson Les Paul promotes easier string bending.


VIBRATO/TREMOLO: The two terms are used interchangeably when referring to a guitar bridge that allows the guitarist to move the pitch of the strings down and up. Vibrato is a musical term referring to a player oscillating the pitch of the note being played (or sung); this controlled wavering is a means of creating individual expression. Tremolo is another name for vibrato tailpiece. In guitar talk, tremolo more correctly refers to the effect where volume continually increases and decreases at a set rate. Whammy-bar is a slang term for vibrato tailpiece.


FLOYD ROSE TREM/FLOYD ROSE TREMOLO: Vibrato tailpiece design that locks down the guitar string both at the bridge and at the nut. This prevents the active string length from changing and keeps the guitar in tune no matter how vigorously the whammy bar is used. One tradeoff with a double-locking trem system is that it takes a little longer to change strings.


Visit Tone Tip: Axe Lingo Made Easy - Part II for more terms.