- H68041 000001000 H68041000001000
Royer R-101 Ribbon Mic
- Write a Review
The R-101 is a mono, passive ribbon microphone utilizing a patented offset-ribbon transducer and a 2.5-micron ribbon element. The R-101 is hand-built...Read More
The R-101 is a mono, passive ribbon microphone utilizing a patented offset-ribbon transducer and a 2.5-micron ribbon element. The R-101 is hand-built in Royer's Burbank, CA facility and delivered at a price point suitable for home studio use and live applications.
The R-101 is a new breed of modern ribbon microphone, designed for studio work and demanding live applications (particularly live electric guitar and brass). It incorporates many features pioneered by Royer Labs, including an advanced multi-layered wind screen for superior protection from air blasts and plosives, a patented offset-ribbon transducer, and an internally shock mounted ribbon transducer system which provides greater isolation from shocks and vibrations, and reduced proximity effect for closer miking with less bass buildup. Throw it on a guitar cabinet, hit record, play it back, smile.
The ribbon element's smooth frequency response and phase linearity impart a warm, analog feel to digital recordings, where the depth and realism on playback feels more like tape rolling than digits being computed. A perfect choice for electric guitars, brass instruments and drums, the R-101's figure-8 pattern also conveys superb ambience and depth when used for room miking applications.
Patented Offset Ribbon Technology
The R-101 incorporates Royer's patented offset-ribbon technology and a low mass, 2.5-micron aluminum (99.9% pure) ribbon element. The ribbon transducer's flux-frame and rare earth Neodymium magnets create a powerful magnetic field which increases sensitivity while reducing stray magnetic radiation.
The R-101's offset-ribbon transducer (Patent # 6,434,252) positions the ribbon element towards the front (logo) side of the microphone body. This proprietary arrangement gives the ribbon element more room to move within the prime magnetic field and maintain full frequency response during high SPL recordings. It's an integral part of the magic in all Royer R-series microphones.
The offset-ribbon transducer also gives you the option of a brighter response when recording lower SPL sound sources on the backside (3 feet and closer; phase reversed in this position). The backside of the mic is often preferred on vocals, acoustic guitars and other stringed instruments.
Like all Royer mics, the R-101 comes with a lifetime warranty to the original owner and the first re-ribbon is free.
A handcrafted ribbon mic that delivers superior sound quality and exceptional performance.
- High SPL capabilities for electric guitar and percussion
- Multi-layered windscreen provides superior protection to ribbon element
- No internal electronics to overload or produce distortion up to
- maximum SPL rating
- Extremely low residual noise
- Ribbon element not affected by heat or humidity
- Absence of high-frequency peaks, "ringing" and phase shifts
- Equal sensitivity from front or back of element
- Lifetime warranty, 1st re-ribbon is free
- Applications:Close mikingElectric & acoustic guitarsDrum overheads, kick drum Percussion instrumentsBrass, horn sectionsStrings-solo & sectionsAcoustic pianoVocalsLive events-recording and sound reinforcement
R-101 Ribbon Mic
- Acoustic Operating Principle: electro-dynamic pressure gradient
Polar Pattern: Figure-8
Generating Element: 2.5 micron aluminum ribbon
Frequency Range: 30HZ - 15,000HZ ±3dB
Sensitivity: -48 dBv Ref 1 v/pa
Output Impedance: 300" (nominal) balanced
Rated Load Impedance: 1500" or greater
Maximum SPL: > 135dB
Output Connector: male XLR 3-pin (Pin 2 Hot)
Dimensions: 7.9" L X 1.4" W (200mm L X 36mm W)
Weight: 483g (17 oz)
Finish: matte black
Accessories: shock mount, carrying case, mic sock
Optional Accessories: Pop screen
Microphone Warranty: lifetime to original owner (repair or replace
at Royer's option)
Ribbon Element Warranty: One Year
Reviewed by 2 customers
Displaying reviews 1-2
- Easy To Use
- Home Studio
- Professional Recording
Comments about Royer R-101 Ribbon Mic:
The Royer R-101 is a modern sounding ribbon mic that works great on electric guitars, but also on other instruments. I actually like it better than the R-121, which is a bit more expensive than this one (go figure). The R-121 had an overwhelming amount of low mids, which are not as pronounced on the R-101. The latter sounds more natural to my ears, YMMV.
For best results, combine this with a dynamic microphone (such as the Shure SM57 or the Sennheiser MD421) and then EQ the sound using the faders on your mixer/DAW. Experiment with distance to dial in the sound you want, but keep in mind phasing issues though.
Comments about Royer R-101 Ribbon Mic:
Great mic and I use it on all electric guitar cabs along with the Heil PR30 and Audix i5. The 101 has been used by itself, but I like to add a little flavor with the dynamic mics.
Ribbon Microphone, Shock Mount and Case. Very Professional.
Very natural tones. What you hear is what you get.
For a Royer the price is a great deal. They still make it in the USA except the body, shock mount and case is made in China. Oh well, still the inards are made in California.