- Back to Top
- OverviewJump to Overview
- FeaturesJump to Features
- WarrantyJump to Warranty
- ReviewsJump to Reviews
Lehle P-Split Splitter Guitar Pedal
- Write a Review
- #150527 000000000 150527000000000
- Free Shipping (48 Contiguous U.S. States)
P-Split stands for "passive splitting" with maximum signal fidelity. With the Lehle guitar pedal, one instrument can be routed to two amplifiers simu...Click To Read More About This Product
6-Month* financing available.
Gold plated switches and no ground loops.
P-Split stands for "passive splitting" with maximum signal fidelity. With the Lehle guitar pedal, one instrument can be routed to two amplifiers simultaneously. Output A is electrically isolated from Output B by the Lehle LTHZ high end transformer - so ground loops are excluded from the start. In addition, the Lehle P-Split also features a gold-plated-contact phase-reversing and ground switch.
The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.
1 The input signal should be fed into this jack. The Lehle P-Split operates purely passively. The input signal remains continuously connected to outputs A and B with no semiconductors or any other active component in the signal path.
2 The input signal and its ground are directly present on jack B.
3 This switch can be used to rotate the phase of the input signal on output A through 180. Shifting the phase may help if phase cancellations have a negative effect on signal reproduction.
4 Pressing this switch connects the grounds of outputs A and B.
5 The input signal is present on jack A, electrically isolated by the Lehle LTHZ (7) high-end transformer.6 The base of the Lehle P-Split can be secured without difficulty. First remove the four housing screws for the cover, and then screw the base of the switch to a base-plate using the two screws supplied with the unit, the washers and the spacer elements.
7 The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.
- Gold-plated switches
- Lehle LTHZ transformer
- No hum loops
Smile when you split. Call or click today to order.
- Weight: 420 g
- Length: 3.5"
- Width: 3.6"
- Overall Height: 1.5"
- max. Level: +20 dBU
- THD: <0,4 % @ +20 dBU/ 40 Hz
Fequencyresp.: 30 Hz - 20 kHz -0,3/ +0,8 dB (Source 600 Ohm, Loud 1MOhm
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions (Opens in new window) for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.