- Back to Top
- OverviewJump to Overview
- FeaturesJump to Features
- WarrantyJump to Warranty
- ReviewsJump to Reviews
One Control Crocodile Tail Loop 10 Loop Programmable Switcher
- Write a Review
- Questions & Answers
- L53315 000000000 L53315000000000
6-Month* financing available.
- Free Shipping (48 Contiguous U.S. States)
The One Control Crocodile Tail Loop is the company's flagship product. It allows the player to create and experiment with dozens of sophisticated ped...Click To Read More About This Product
Open up a huge world of possibilities with this flagship loop switcher.
The One Control Crocodile Tail Loop is the company's flagship product. It allows the player to create and experiment with dozens of sophisticated pedal board configurations. Crocodile Tail Loop features 7 preset banks, with 10 available programs per bank for a total of 70 presets. The MIDI I/O allows remote operation, as well as control of midi capable effects. It incorporates a bypassable BJF buffer to ensure no signal loss, can be used to switch between multiple amplifiers, and offers a tuner/mute switch. The Link and Sync feature (OC10-CABLE required) allows 2 units to be connected for simultaneous off-stage operation.
BJF Buffer Routing
Many people ask why the Crocodile Tail Loop has a buffered and non-buffered input. The reason is because with some pedals, guitarists prefer to have a buffer later in their signal chain as to not interfere, or they simply would like no buffer at all.
That is why the Crocodile Tail Loop has a buffer input and output. Think of the buffer input and output just as you would any other guitar pedal. For example if You want have the buffer in loop 8 just run from send 8 into the buffer input, then from the buffer output into return 8.
The Crocodile Tail Loop gives an amazing amount of flexibility when it comes to routing. Selectable buffer switching, amp channel switching and effect loop access are just some of the ways that the Crocodile Tail Loop can help you with routing you guitar and pedalboard.
Amp Channel Switching
The Crocodile Tail Loop has three separate loops that can be used for a variety of purposes. These loops can be used for amp channel switching or connecting effects to go into an amp’s effects loop as well as a variety of other functions to match individual guitar player’s needs.
Loops 8-10 are all labeled with NO and NC. This stands for Normally Open or Normally Closed. Check your amp's manual to see whether the foots switch in normally open or normally closed. If your amp has a quarter inch input for amp channel switching it is quite likely that the Crocodile Tail Loop will be able to switch your amp's channels.
The Crocodile Tail Loop comes equipped with a midi input and output/thru. The Crocodile Tail Loop was built to be incredibly user friendly and we decided that should be a part of the midi function as well. With close to no programming at all, guitarists can switch midi programs with their favorite digital effects. Please note that the Crocodile Tail Loop can only send PC# (Patch Change) without the CrocEye.
The Crocodile Tail Loop has TX and RX functions. TX stands for transmit midi, and RX stands for receive midi. Guitarists can choose whether or not they want to send or receive midi program changes on internal programs.
The midi output can also be changed to a midi thru. That way, if you'd like to use a more advanced midi controller or software to control your effects, it is completely possible.
For advanced MIDI functions (PC# and CC#), the CrocEye is needed. With the CrocEye, you'll be able to send tap tempo instructions to all Strymons by pressing a single footswitch on the Crocodile Tail Loop. The CrocEye can support up to 16 devices and 16 channels.
Link and Sync Functions
One option that separates the Crocodile Tail Loop from many other switchers on the market is the Sync and Link functions. Being able to link or remotely control a loop switcher is incredibly important for many professional musicians. Whether or use a rack of effects or you prefer to have your tech controlling you patch changes, the Crocodile Tail Loop is a great solution for guitarists who use pedals.
The Link function allows players to connect two Crocodile Tail Loops together with a proprietary cable that uses LAN connectors. Please keep in mind; a standard LAN cable will not be able to connect two Crocodile Tail Loops together. The specific One Control cable must be used. A standard LAN cable will not work. Imagine being able to make combination of up to 20 pedals with one switch.
The Sync function is also extremely useful. As previously mentioned, being able to remotely control a loop switcher is extremely important for professional musicians. With the Crocodile Tail Loop, One Control gives you two options to do so. The first is using two Crocodile Tail Loop and controlling one with the other with our proprietary link cable. The second is using the Crocodile Tail Loop's midi input and controlling the Crocodile Tail Loop with your preferred MIDI controller. Since the Crocodile Tail Loop responds to standard program changes, using it with other midi controller's is very simple.
Using the Crocodile Tail Loop in Stereo
While the Crocodile Tail Loop's jacks are mono, it can be used with one stereo effect in combination with 8 mono pedals. Because the Crocodile Tail Loop has two identical outputs from loops 1-7 you can use one of the extra outs to help with the stereo process. Please keep in mind that using a stereo pedal will take two of the separate loops from the Crocodile Tail Loop.
1.Run a cable from out #8 to stereo effect input
2.Run one left output from effect into return 8
3.Run the right output from effect into return 9
4.Run cable from out 1 into in 8
5.Run cable from out 2 into in 9
6.Run out 8 to left amp
7.Run out 9 to right amp
These processes can also we done with loops 9 and 10 if so desired. Please keep in mind that stereo effects should be the last step in setting up your Crocodile Tail Loop. Of course going mono after going stereo would mean you final signal would once again become mono.
Call or click to order today!
- Power Supply: DC9V
- Current Drain: 450mA
- Input impedance: 500K ohm
- Output impedance: 10K ohm Max.
- Total Loops: 10
- Series Loops: 7
- Seperate Loops: 3
- Midi: 1 Midi In and 1 Midi Out/Thru
- Dimensions: 18.2" x 4.35" x 2.5"
- Weight: 3.96 lb. (1,800g)
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions (Opens in new window) for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.