Lift Buffer/Boost Effects Pedal

The Pettyjohn Lift is the third offering in the company's single-pedal format, The Foundry Series, and it draws inspiration from its original signature pedal, The PreDrive. The Lift is a studio-grade Buffer/Boost pedal utilizing the best of modern discrete op-amp technology. It's is built with the same top-shelf components as the PreDrive, so it retains its audiophile-level performance. However, Pettyjohn has taken it a step further with several notable changes.

The Lift operates as an always-on pedal, being either in Buffer mode or Boost mode, switchable via the footswitch. The Buffer is a truly state-of-the-art circuit, featuring a single discrete op-amp powered by a dual-rail power supply providing huge headroom and tuned for absolute transparency. The discrete op-amp gently "lifts" the tonal quality without un-wanted color, unlocking every nuance of your guitars tone with a musical, 3-D depth. The Buffer mode has an input gain control that allows the user to boost the signals core gain slightly with absolute sonic fidelity.

The Boost mode, activated via the footswitch activates the “Boost” gain knob and unlocks loads of clean gain! The Lift boost has 24dB of clean gain on tap at standard 9V operation and if you need more, there is an internal toggle switch that boosts the max gain to a whopping 32dB of clean gain, recommended when using an 18V power adaptor. Whether you just need a small jump to bring your lead out front or if you need to push your amp over the top into sweet high gain tones, the Lift can handle it with ease.

Although the Lift features one of the cleanest, most musical Buffer and Boost circuits on the planet, the Lift's features don’t stop there. The designers equipped the Lift with a studio-grade EQ, featuring recording console styled High Cut and Low Cut filters. Both filters start at the extreme edge of the audible range and gently sweep towards the mid-range with a roll off rate of 6 dB per octave. The filters are very transparent and allow the user to shape the signal while leaving your guitars fundamental tone completely intact. Furthermore, the mini toggles on the Lift provide a unique function. The mini toggles are used to assign each filter, which can each be independently active only in Boost mode or always active! Assignable filters allow for a large variety of creative applications not possible with your average boost pedal. Treble boost, mid boost and bass boost are all possible in various shades, as well as being able to use the pedal as a simple EQ without extra gain.

The Lift is a culmination of almost 3 years of R&D in the application of Discrete Opamp application! It's the first pedal to offer pure discrete op-amp-based tone on 9V-18V standard pedal power and have assignable EQ.