Skip to main content Skip to footer
Financing available on 100+ brands. Get Details
Call our Gear Advisors (877) 509-9963 Hablamos Español
MF MD HG01 Electric Guitar Month 06-19-18

AEA Microphones TRP Ribbon Mic Preamplifier

  • Write a Review
Product J52641
Product Price $0.00
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

Most preamps are geared towards the needs of condenser mics. But if you’re miking with a ribbon, you’re probably doing it because you want to hear th...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
Don't Forget
OVERVIEW

Preamp designed for ribbon mice.

Most preamps are geared towards the needs of condenser mics. But if you’re miking with a ribbon, you’re probably doing it because you want to hear the smooth, open tone that a ribbon gives you. However, if you’re using a mic pre designed for condensers, you might be trying to fit a ribbon-shaped sound through a condenser-shaped hole, and throwing away much of the ribbon’s tone in the process. In fact, you may have never heard everything your ribbon mics are capable of.

The AEA TRP is the first mic preamp designed specifically to fit the needs of a ribbon mic. First, the JFET discrete front end provides 83dB of gain. AEA made that gain as quiet as physically possible by leaving out the phantom power circuitry and giving it an external power supply. The TRP’s 300 kHz of bandwidth makes it well-equipped to handle fast transients and the Low-Energy-Storage (LES)TM circuit topology allows it to recover instantly from overloads, providing you with everything you need for 192 kHz high-resolution recordings.

The AEA TRP is optimized for ribbon, moving coil, and tube mics that don’t need phantom power. It allows you to hear more of what you want to hear and less of absolutely everything else. 

FEATURES
  • Gain is >83 dB at 1 kHz, balanced in to balanced out
  • Positive polarity is pin 2 on XLRs, tip on 1⁄4 “ stereo jacks
  • Balanced outputs clip above +28 dBu, 100k load
  • Unbalanced XLR output load reduces max level by ~6 dB
  • Unbalanced 1⁄4” TRS outputs clip at +22 dBu, 100k load
  • Frequency response: down 3 dB at 6 Hz and 300 kHz
  • THD at 1 kHz is .005% with 22 Hz to 22 kHz bandwidth
  • EIN, (weighted noise figure): -130 dBu, 150 Ω input
  • Balanced mic input impedance: >30,000 Ω
  • Microphone input electronics are DC coupled
  • Mic inputs are zener protected from external P48 DC
  • Mic inputs shut off while external DC is present
  • Green LED snaps on at ~ - 5 dBu
  • Yellow LED is variable brightness from ~ 0 to +20 dBu
  • Red LED snaps on at ~ +20 dBu
  • High-pass filter: 12 dB per octave and -3 dB at 100 Hz
  • Power supply provides two 17.25 VAC outputs

If you've gone so far as to get a quality ribbon mic, take the next step. Order today.

Reviews
Loading....
See All AEA Microphones Microphone Preamps
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.