Skip to main content Skip to footer
Earn 16% or 24% during Backstage Pass Days
Call our Gear Advisors (877) 509-9963 Hablamos Español
MF MD HG01 Fall Guitar Fest 9-19-18

Crest Audio CD 2000 2000W Power Amplifier

  • Write a Review
Product 481647
Product Price $0.00
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

The CD 2000 Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The C...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:

Compact, efficient, and powerful.

The CD 2000 Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The CD 2000 is very versatile, whether powering nightclub systems or touring bands.

A traditional linear power supply is used in CD Series amps. Because of the efficiency of the switching output stage, the transformer does not need to be big or heavy. This gives Crest's CD Series an advantage in delivering huge power in a compact rackmount package. The efficiency of the output stage also gives the power supply the ability to handle heavy duty cycles without compromising sonic integrity.

Crest Audio's engineering has also maintained sonic quality while incorporating the advantages of a switching output stage. High-power Class-D topology is the key to its efficiency and low operating temperature. An additional advantage is its low power consumption.

8 Ohm Stereo ” 560 W
4 Ohm Stereo - 1000 W
2 Ohm Stereo - 1200 W
8 Ohm Bridged - 2000 W
Dramatically reduced net weight
Linear power supply / Class D output stages
Very low current draw
Latest generation of high-speed, mosfet output devices
Cooled by variable-speed fan with back-to-front airflow
Inputs: balanced female XLR, 1/4" TRS combi jacks
Outputs: Speakon and five-way binding posts
Mode selector switch for stereo, parallel and bridged-mono operation
Ground-lift switch and rear panel circuit breaker
Recessed, stepped attenuators with removable knobs
16-gauge steel chassis, cast aluminum front panel
TourClass protection circuits
ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold
IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may over-stress output devices, allowing safe operation into nominal 2 Ohm speaker loads
AUTORAMP gradually increases gain to the attenuator level-settings when the amplifier is turned on, preventing abrupt turn-on levels
Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turn-on/off transient and sub/ultrasonic input
Five-year warranty
Model: CD 2000
Stereo Power 8 Ohms: 560 Watts
Stereo Power 4/2* Ohms: 1000 Watts
Stereo Power 2 Ohm: 1200 Watts
Bridged Power 8/4* Ohm: 2000 Watts
1kHz, 0.2% THD+N Power figures are watts per channel, both channels driven.
*11kHz, 0.4% THD+N for 2 ohm stereo and 4 ohm bridged operation.
Maximum output voltage: 72V rms
Frequency response 1W @ 8 ohms: 20Hz”20khz, +/-1db
Power bw rated power @ 4 ohms, 1% THD+N: 20Hz”20khz, +/-1db
THD + N: <0.2% rated power @ 4 ohms, 1khz power @ 8 ohms
Imd; SMPTE/DIN 4:1 (60 Hz / 7 khz): <0.35% @ -3 db below rated
Damping factor: 400:1 @ 8 ohms (20 Hz to 100 Hz)
Input CMRR: >60db @ 1khz
Gain / input sensitivity @ 4 ohms: Selectable: x20, x40, or .775 V for full rated output power
Input impedance: >20kohms balanced, >10kohms unbalanced
Hum and noise: > -100db, A-weighted below rated power @ 4 ohms
Crosstalk: > -60db below max rated power (1khz)
Class: D
Power supply: Linear with toroid transformer
Circuit breaker rating (120V/230V): 15A /10A
Current draw (120VAC) 1/8 power, 4 ohms: 4.5A
1/3 power, 4 ohms: 9.6A
At idle: 1.25A
Thermal emissions 1/3 Power, 4 ohms BTU / hr: 781
Cooling: Back to front via variable speed DC fan
input connectors: balanced female XLR, 1/4" TRS, unbalanced 1/4" TS on Neutrik combo connectors
output connectors: Five-way "touch-proof" binding posts and Neutrik Speakon connectors (which presents
both outputs on the A Speakon for bi-amplified applications)
controls: front panel: twin recessed stepped attenuators, power switch
rear panel: signal ground-lift, mode select, gain select, circuit breaker
LED indicators: signal level (5 element bargraph), protect, active, ACL / IGM
Construction: 16-gauge steel chassis, cast aluminum front panel - optional handles available
Dimensions (W x H x D): 19" x 3.5" x 15.375" (483 x 89 x 391 mm)
Weight: 40.9 lb (19 kg)
Questions & Answers View All
Questions & Answers
See All Crest Audio Live Power Amplifiers
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.