Play Video

{"id": "L80421", "categoryId":"site1SDB", "pageName":"Control One Monitor Controller", "pageUrl":"/pro-audio/spl-control-one-monitor-controller", "thumbnailUrl":"", "addToCartUrl":"/pro-audio/spl-control-one-monitor-controller", "hasFeatures":"0", "isAccessory":"1", "message":"The Monitor Controller with innovative features, developed for fast workflow and impressive sound quality. N   U   M   B   E   R       O   N   E       I   N       S   O   U   N   D Sound is always in the foreground. To get such a sound, you need experience and technical finesse. Both are incorporated into the Series One. Speaker & Subwoofer You can listen to your production via two switchable pairs of speakers. A subwoofer is also switched on and off with speaker pair A. In the middle position of the switch, the speakers are switched off, which is convenient because you don’t have to turn the volume control back. Two Stereo Inputs Two analog stereo inputs can be connected to the Control One for sources such as a DA converter, CD player, mixing console, synthesizer or analog tape machine/tape deck, which can also be listened to mixed together (1+2). Line Out The selected input signal is output unchanged at the Line Out. This allows the Control One to be looped between devices without “losing” an output. If, for example, several people are to listen in via headphones, a headphone amplifier can simply be connected to the Line Out. You can also record the signal analog or send it to a mixer for further processing. Three Monitoring Modes In the middle is the default setting “Stereo”. To check the mono compatibility set the switch to “Mono”. The special feature is the channel swap function:  L/R > R/L  Reverses the stereo image. L/R becomes R/L. This is especially important and extremely time-saving when you are searching your sound library for samples in video dubbing that should match a scene with direction of movement. If the direction is not correct, you usually have to load the sample into the DAW to switch channels before you can hear if the sample fits. With the L/R > R/L function this is no longer necessary. You can now simply swap the direction of movement while pre-listening samples in the library. The Headphone Power Amp Poor sound over headphones? Not enough juice? Not here. Control One delivers a rich headphone sound and it can get really loud.The output stage of the headphone amplifier is designed as a push-pull amplifier in class AB mode. The bipolar transistors share the amplification of the positive and negative half-waves, which produces a higher gain and a higher output voltage than in Class A operation, where only one transistor amplifies both half-waves.The output stage transistors are thermally coupled and thus run particularly coherently, which contributes to a consistent and stable sound image.The power supply has a buffer circuit with low source resistance, ensuring generous current reserves even when driving low-impedance headphones. The Revolution  The best feature in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers.The Phonitor Matrix in its largest expansion stage has three parameters: Crossfeed, Speaker Angle and Center Level.In the Control One, the center level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values. The crossfeed function determines the so-called interaural level difference. The intensity of the crossfeed is fully variable. At the beginning of the control path the crossfeed circuit is not in the audio path. Dialing the control in switches on the crossfeed circuit via relay (hysteresis circuit). The audio signal therefore does not pass through the crossfeed stage if this is not desired. Best fit If theactive speakers or the power amplifier are very sensitive the playback may already be fairly loud when the Volume control is in the first third of its control range. By activating the-10 dB dip switch the output level is lowered to accommodate for a wider usable range of the Volume control.With the Rec 1+2 dip switch both line inputs are mixed together and can be recorded via USB. Power Supply Good sound always starts with the power supply. This is where you lay the foundation for the performance of the entire device.Although we “only” supply a 12 V plug-in power supply unit, the secondary power supply inside generates a voltage level of +/-17 Volts for the analog audio sections with which professional levels of up to +22.5 dB can be achieved!An elaborate low-drop operating voltage regulation provides more “juice” and regulates cleanly even when the maximum operation voltage is reached. The Control One delivers full power when used with the included 1.5 A power supply. Only use the 12 V plug-inpower supply unit within the scope of delivery. The ON-switch puts the Control One into operation <div style="font-family: Arial; font-size: 15px;"> </div> <div style="font-family: Arial; font-size: 15px;"> </div>", "value":"699.00", "priceMin":"699.00", "priceMax":"699.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"SPL", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"", "stickerText": ""}

Control One Monitor Controller

We're sorry-this item is unavailable.
Contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Overview

Added power and features give you total control.

The Monitor Controller with innovative features, developed for fast workflow and impressive sound quality.

N U M B E R O N E I N S O U N D

Sound is always in the foreground. To get such a sound, you need experience and technical finesse. Both are incorporated into the Series One.

Speaker & Subwoofer
You can listen to your production via two switchable pairs of speakers. A subwoofer is also switched on and off with speaker pair A. In the middle position of the switch, the speakers are switched off, which is convenient because you don’t have to turn the volume control back.

Two Stereo Inputs
Two analog stereo inputs can be connected to the Control One for sources such as a DA converter, CD player, mixing console, synthesizer or analog tape machine/tape deck, which can also be listened to mixed together (1+2).

Line Out
The selected input signal is output unchanged at the Line Out. This allows the Control One to be looped between devices without “losing” an output. If, for example, several people are to listen in via headphones, a headphone amplifier can simply be connected to the Line Out. You can also record the signal analog or send it to a mixer for further processing.

Three Monitoring Modes
In the middle is the default setting “Stereo”. To check the mono compatibility set the switch to “Mono”. The special feature is the channel swap function:

L/R > R/L
Reverses the stereo image. L/R becomes R/L. This is especially important and extremely time-saving when you are searching your sound library for samples in video dubbing that should match a scene with direction of movement. If the direction is not correct, you usually have to load the sample into the DAW to switch channels before you can hear if the sample fits. With the L/R > R/L function this is no longer necessary. You can now simply swap the direction of movement while pre-listening samples in the library.

The Headphone Power Amp
Poor sound over headphones? Not enough juice? Not here. Control One delivers a rich headphone sound and it can get really loud.The output stage of the headphone amplifier is designed as a push-pull amplifier in class AB mode. The bipolar transistors share the amplification of the positive and negative half-waves, which produces a higher gain and a higher output voltage than in Class A operation, where only one transistor amplifies both half-waves.The output stage transistors are thermally coupled and thus run particularly coherently, which contributes to a consistent and stable sound image.The power supply has a buffer circuit with low source resistance, ensuring generous current reserves even when driving low-impedance headphones.

The Revolution
The best feature in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers.The Phonitor Matrix in its largest expansion stage has three parameters: Crossfeed, Speaker Angle and Center Level.In the Control One, the center level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values. The crossfeed function determines the so-called interaural level difference. The intensity of the crossfeed is fully variable. At the beginning of the control path the crossfeed circuit is not in the audio path. Dialing the control in switches on the crossfeed circuit via relay (hysteresis circuit). The audio signal therefore does not pass through the crossfeed stage if this is not desired.

Best fit
If theactive speakers or the power amplifier are very sensitive the playback may already be fairly loud when the Volume control is in the first third of its control range. By activating the-10 dB dip switch the output level is lowered to accommodate for a wider usable range of the Volume control.With the Rec 1+2 dip switch both line inputs are mixed together and can be recorded via USB.

Power Supply
Good sound always starts with the power supply. This is where you lay the foundation for the performance of the entire device.Although we “only” supply a 12 V plug-in power supply unit, the secondary power supply inside generates a voltage level of +/-17 Volts for the analog audio sections with which professional levels of up to +22.5 dB can be achieved!An elaborate low-drop operating voltage regulation provides more “juice” and regulates cleanly even when the maximum operation voltage is reached.

The Control One delivers full power when used with the included 1.5 A power supply. Only use the 12 V plug-inpower supply unit within the scope of delivery. The ON-switch puts the Control One into operation

For fast workflow and optimal sound quality. Order today.

Specs

Control One Monitor Controller Specifications:
Analog inputs & outputs: 6.35 mm (1/4") TRS Jacks
Input gain (max.)
+22.5 dBu
Line Input 1 (balanced): Input impedance
20kΩ
Line Input 1: Common mode rejection
< 60dB
Line Input 2 (unbalanced): Input impedance
10kΩ
Output gain (max.): Speaker Outputs (600 Ω)
+22dBu
Line Output (unbalanced): Output impedance
75Ω
Speaker Output 1 (balanced): Output impedance
150Ω
Sub Output low filter
none (full range)
Sub Output (balanced): Output impedance
150Ω
Speaker Output 2 (unbalanced): Output impedance
75Ω
Frequency range (-3dB)
10 Hz -200kHz
Dynamic range
121dBNoise (A-weighted, 600 Ω load)
-99dBu
Total harmonic distortion (0 dBu, 10 Hz –22 kHz)
0.002%
Crosstalk (1 kHz)
< 75dB
Fade-out attenuation
-93dB
Headphones Output; 6.35 mm (1/4") TRS Jack

Wiring
Tip = Left, Ring = Right, Sleeve = GND
Source impedance
20Ω
Frequency range
(-3 dB)10 Hz -200kHz
Noise (A-weighted, 600 Ω)
97dBu
THD + N (0 dBu, 10 Hz –22 kHz, 600 Ω)
0.002%
THD + N (0 dBu, 10 Hz –22 kHz, 32 Ω)
0.013%
Max output power (1 kHz, 600 Ω)
2 x 190mW
Max output power (1 kHz, 250 Ω)
2 x 330mW
Max output power (1 kHz, 47 Ω)
2 x 400mW
Fade-out attenuation (600 Ω)
-99dB
Crosstalk (1 kHz, 600 Ω)
-75dB
Dynamic range
117dB
Internal Power Supply
Operating voltage for analog audio
+/-17V
Operating voltage for headphone amplifier
+/-19V
Operating voltage for relays and LEDs
+ 12V
External Power Supply
AC/DC switching adaptor
Mean Well GE18/12-SC
DC plug
(+) pin 2.1mm; (-) outside ring 5.5mm
Input
100 -240 V AC; 50 -60 Hz; 0.7A
Output
12 V DC; 1.5A
Dimensions & Weight
W x H x D (width x height incl. feet x depth)
210 x 49,6 x 220mm
8.23 x 1.95 x 8.66inch
Unit weight
1.5kg
3.3lbs
Shipping weight (incl. packaging)2kg4.4lbs

Shop with a Friend

Free Shipping

Free Standard Ground shipping (48 contiguous states, some overweight and Used/Vintage items excluded).

Orders placed before 3 p.m. ET usually ship the same business day.

Learn More

2-Year Free Warranty on Guitars
Every guitar or bass you purchase from Musician's Friend (electric or acoustic, New or Open Box) includes two years of protection from manufacturer defects.
Contact Us for Details

We're Here for You
Our Gear Advisers are available to guide you through your entire shopping experience. Call or Chat for expert advice and to hear the latest deals.
Contact Us

Want to customize your own bundle?

Our Gear Adviser are ready to help.

Musician's Friend Support

A Gear Adviser is ready to take your questions

Our Gear Advisers are currently offline

Call Us Let's Chat(opens in new window) Request a Callback

MON - FRI 6 AM - 8 PM PT

SAT - SUN 7 AM - 7 PM PT

Looking for something else? Find answers at our Help Center

Your Cart Is Empty

Control One Monitor Controller

Added power and features give you total control.

Control One Monitor Controller Specifications:

Musician's Friend Support