• Gift Certificate
  • Track Order
  • Help
  • Feedback [+]
  • Ship To: US Flag
  • Shop All Categories
  • Hot Deals

MF MD HG Clearance Blowout 10-23-14

Eminence Beta 10A PA Replacement Speaker  10 Inches

  • Write a Review
SKU 
#667719000000153
Price Drop
  • MSRP:
    $84.99
  • Your Savings:
    - $17.94
  • New Price:
    $6705
  • Free Shipping
  • Price Drop
  • Top Rated
  • Top Seller
See All Eminence Speakers for PA Speakers
Eminence

Upgrade your PA system with this heavy-duty replacement speaker !

The Eminence Beta 10A is an ideal replacement speaker for your vocal PA, keyboards, club music systems, and for stage monitors.

Eminence recommends the Beta 10A as a replacement speaker for the Mackie SRM350 and as an alternate to the Alpha 10A as a replacement for the Kustom KPC10M.


Get better sound for your PA today! Click or call to get your Beta replacements!

 

Beta 10A PA Replacement Speaker Specifications:

  • Specification
  • Nominal Basket Diameter: 10", 254mm
  • Nominal Impedance*: 8 ohms
  • Power Rating: Watts 250W; Music Program 500W
  • Resonance: 53Hz
  • Usable Frequency Range: 51Hz-3.8kHz
  • Sensitivity***: 97
  • Magnet Weight: 34 oz.
  • Gap Height: 0.312", 7.92mm
  • Voice Coil Diameter: 2", 50.8mm
  • Thiele & small parameters
  • Resonant Frequency (fs)
  • 53HzDC Resistance (Re): 5.75
  • Coil Inductance (Le); 0.67mH
  • Mechanical Q (Qms): 8.14
  • Electromagnetic Q (Qes): 0.52
  • Total Q (Qts): 0.49
  • Compliance Equivalent Volume (Vas): 60.1 liters / 2.1 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd): 102cc
  • Mechanical Compliance of Suspension (Cms): 0.36mm/N
  • BL Product (BL): 9.6 T-M
  • Diaphram Mass inc. Airload (Mms): 25 grams
  • Efficiency Bandwidth Product (EBP): 103
  • Maximum Linear Excursion (Xmax): 3.0mm
  • Surface Area of Cone (Sd): 344.9 cm2
  • Maximum Mechanical Limit (Xlim): 8.6mm
  • Mounting information
  • Recommended Enclosure: Sealed
  • 8.5-14.2 liters/0.3-0.5 cu.ft.
  • Vented: 19.8-70.8 liters/0.7-2.5 cu.ft.
  • Overall Diameter: 10.11", 256.8mm
  • Baffle Hole Diameter: 9.13", 231.8mm
  • Front Sealing Gasket: fitted as standard
  • Rear Sealing Gasket
  • fitted as standard
  • Mounting Holes Diameter: 0.23", 5.7mm
  • Mounting Holes B.C. D.: 9.6", 243.8mm
  • Depth: 3.98", 101mm
  • Net Weight: 6.8 lbs., 3.1 kg
  • Shipping Weight: 7.8 lbs., 3.6 kg
  • Materials of construction
  • Coil Construction: Aluminum voice coil
  • Coil Former: Polyimide former
  • Magnet Composition: Ferrite magnet
  • Core Details: Vented core
  • Basket Materials: Pressed steel basket
  • Cone Composition: Paper Cone
  • Cone Edge Composition: Cloth cone edge
  • Dustcap Composition: Solid composition paper dust cap
Customer Reviews
Loading....

Review Snapshot®

by PowerReviews
EminenceBeta 10A PA Replacement Speaker
 
4.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 4 customers

Sort by

Displaying reviews 1-4

Back to top

 
5.0

Pro Musician Review

By souLTower

from Hagerstown, MD

About Me Professional Musician

Pros

  • Great Bargain

Cons

  • None Yet

Best Uses

  • All
  • Concerts
  • Practicing

Comments about Eminence Beta 10A PA Replacement Speaker:

Awesome deal for the money. Very clean sound. No distortion.

I bought these to replace blown mains in a small PA with custom-made cabinets containing a small horn. Using a Yamaha 600W PA head I ran a heavy Switchfoot tune through them at max volume, 300W per side. No distortion. Slightly mid-rangey but I knocked the 1K EQ down a notch and they sounded great. As a test I increased the bass on the EQ. Still no distortion.

I play solo acoustic gigs and believe these will be perfect. They brighten up nicely with some EQ and seem to project well.

The ONLY negative comment that I have is that I noticed where the speaker components are glued, the glue is uneven. This could indicate issues in the manufacturing process and, if too thin in places, could cause an early grave for these.

Comment on this review

(5 of 5 customers found this review helpful)

 
5.0

Good value for Henriksen extension cab

By Armon Haumer

from Cleveland, OH Rock Capital of the World!

About Me Experienced

Ask me a question

Pros

  • Excellent value
  • Good Quality
  • Great For Jazz Guitar
  • Improves Sound

Cons

  • Cannot Handle Bass Notes

Best Uses

  • Concerts

Comments about Eminence Beta 10A PA Replacement Speaker:

I cannot understand why anyone would use the Beta-10 speaker in a bass guitar cabinet. It does not make good bass-note sounds even on a regular six-string guitar (at full amplifier volume).

Nonetheless, my reason for purchasing this speaker was to have an extension cabinet to add to the extra output on my Henriksen Jazzamp 110ER.

The extension jack on the Jazzamp is rated at the same wattage as the Jazzamp combo amp(which is the same make and model).

I have the speaker in an semi-opened-back 14Wx14Lx10D square cabinet, and it is 95% similar in sound to the closed-back Henriksen.

Jazziness sound is excellent (similar to Wes Montgomery or Russell Malone sound).

My guitar is an Ibanez Artcore AF55 equipped with Seymour Duncan Antiquity Pickups, and a .022K oil in paper capacitor.

Back to the first paragraph I wrote, the speaker cannot handle sub-bass notes (regardless of the cabinet that it is in). In my original-equipment Henriksen Jazzamp, the Beta-10 cannot handle bass in it either (at near-full volume), and the amp is only rated at 100 (or more) watts!

If you shelve off the bass on an amp & crank it up to full volume, the sound is excellent.

Comment on this review

 
5.0

Sealed bass cab

Comments about Eminence Beta 10A PA Replacement Speaker:

I've installed a pair of these in a 2x10 sealed bass cab. It sounds like a mini nv610 bass cab. Maybe alittle brighter. They have a great midrange and plenty of punch in the correct enclosure. The top end can be eq'd very easily to sound smooth or ragged. I would not hesitate to use these as a sealed 8x10 replacement driver.

Comment on this review

(0 of 1 customers found this review helpful)

 
4.0

Bass Cabs

By fdrJbrbest

from Atlanta

Comments about Eminence Beta 10A PA Replacement Speaker:

A little short on performance and quality housing, but overall great for a practice amp. Low on cost and can handle some heavy power too. The 4 wired at 4ohms sound even better. Miss a little on higher volumes with low's on a 5 string but can be a part of a nice practice cab.

Comment on this review

Displaying reviews 1-4

Back to top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.