- Product 481744
Markbass Little Mark 250 Bass Amp Head
- Write a Review
The Markbass Little Mark 250 bass amp head is a high-quality bass amplifier with a solid-state preamp and an analog power amp. The Little Mark 250 de...Read More
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
We're sorry—this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Similar Items:
Solid-state preamp and analog power.
The Markbass Little Mark 250 bass amp head is a high-quality bass amplifier with a solid-state preamp and an analog power amp. The Little Mark 250 delivers 250W of power into a 4 ohm cabinet, or 150W into an 8 ohm cabinet. This Little Mark has a 4-band EQ, Markbass' VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, as well as both Gain and Master volume controls. The front panel accepts both a passive or active bass 1/4" input, as well as a balanced XLR input for acoustic bass pickup systems or a microphone. On the rear panel you'll find a Neutrik Speakon combo jack output that accepts both Speakon or 1/4" speaker cable as well as a second 1/4" speaker out jack. You'll also find a balanced XLR out, unbalanced tuner out so you can tune as you play without passing your signal through pedals, and a Send and Return Effect loop which saves you from losing your signal if one of your pedals dies or a cable in the chain gives out.
- Solid state preamp analog bass head
- Provides 150W RMS at 8 ohms, 250W RMS at 4 ohms
- 1/4" input jack works with active or passive basses
- Gain and Master volume controls
- Clip warning light
- EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
- VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
- Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
- Balanced XLR out
- Ground lift switch to eliminate hum
- Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
- Send and Return Effect ensures main signal continues even if something dies in your effects chain
- Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
- Surface-mount components are silicon-sealed to isolate vibrations
- Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
- Integrated threaded posts for easy assembly/disassembly and added durability
Little Mark 250 Bass Amp Head
Input impedance: 500Kohm, max. voltage: 15 Vpp
Balanced input impedance: 22Kohm, max. voltage: 25 Vpp
Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
Output Power: 150W RMS at 8 ohms, 250W RMS at 4 ohms
Voltage is factory preset for the U.S.
GAIN: ”80dB to +23dB range
GROUND LIFT: Switch on rear panel
Center frequency: 40Hz; level ±16dB
Semi-parametric: frequency 360Hz, level ±16dB
Semi-parametric: frequency 800Hz, level ±16dB
Semi-parametric: 10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
Center frequency: 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250Hz ” 20kHz cut
Unbalanced, max. voltage 20 Vpp (pre-EQ)
Unbalanced, max. voltage 25 Vpp
Balanced XLR, max. voltage 10 Vpp
Dimensions: 10.87"(W) x 2.8"(H) x 10.1"(D)
Weight: 5.73 lbs.