- Product 482416
Traynor DynaBass 800H Bass Amp Head
- Write a Review
The Traynor DynaBass 800H is set apart from other bass amp heads by its versatile hybrid tube and solid state preamp. The all-tube input signal path ...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
A hybrid with loads of horsepower.
The Traynor DynaBass 800H is set apart from other bass amp heads by its versatile hybrid tube and solid state preamp. The all-tube input signal path gives you as much grunge or as little tube warmth as you want. Meanwhile, the FET-driven solid state input circuit ensures highly responsive and clean tone. The DynaBass amp head's innovative blend control ensures the right mix of raw power and definition.
Built for the most demanding stages, the DynaBass 800H is one of the highest-powered bass amps Traynor's ever offered. The highly efficient solid state amplifier section reliably delivers 800W to a 4-ohm load for maximum compatibility with a typical live rig.
A dual fan cooling system integrated into the DynaBass 800H completely negates the need for heavier heatsinks. Well placed intake/exhaust vents allow the two cooling fans to immediately draw all extraneous heat away from the amplifier to make sure the amplifier won't overheat even under the most extreme live conditions.
Innovative tone-shaping controls like Scoop and Bass Resonance are standard on the DynaBass 800H as well as a compressor with user-definable threshold and a customizable output limiter. The variable contour Scoop function sweeps from a flat frequency response through a mid-frequency dip at 400Hz. As you increase beyond the halfway point on the control, you begin to boost both the top and bottom end to your tone, in addition to further reducing the midrange level. The Bass Resonance control actually controls the damping factor of the amplifier's output stage, and lets you take full advantage of the tone of a loudspeaker enclosure. When used with a high quality and responsive loudspeaker like the Traynor TC810, Bass Resonance allows you to dial in the exact response from your rig that you want to hear - anything from a tight and punchy modern tone to a looser, more vintage bass sound. The five-band EQ with semi-parametric mid also aids in finding the tones you need.
Other professional features added to the DynaBass 800H include highly visible VU metering of the output signal, a front panel wet/dry control for the footswitchable tube drive, footswitchable effects return with front panel wet/dry blend control, and a pre/post selectable XLR balanced DI output with ground lift. High power handling Speakon extension speaker cabinet outputs have been added in addition to the 1/4" phono jacks commonly used on instrument amplifiers.
- 800W at 4 ohms
- Hybrid tube/solid state preamp design (switchable)
- 5-band EQ with sweep mid with additional Scoop & Bass Resonance controls
- Footswitchable Tube Overdrive with Clean Blend
- Onboard Compression and Limiting
- Tuner mute
- Active and passive instrument level inputs
- Integrated metal flip handles
- XLR balanced Pre/Post DI output
- Integrated solid plywood sleeve w/additional single 19" accessory rack space
- Amp In (rear)
- Parametric mid
- Wet/Dry Blend on EFX Return
- Wet/Dry control on Drive mode
- Tuner mute switch and 1/4" tuner out jack
- Bass resonance
- Master volume control
- Effects Loop (Rear)
- 12 LED output power display with Clip indicator
Mix your sound through the blender of a tube and solid state hybrid for a special tone. Order today.
DynaBass 800H Bass Amp Head
- Power at min. impedance: 600W at 8 ohms; 800W at 4 ohms; 600W at 2 ohms
Minimum impedance (ohms): 2
Burst power - 2 cycle: 1000
Channel 1 - inputs: 2x1/4
Channel 1 - controls: 5-band EQ with parametric sweepable mid, Tube Gain
Channel 1 - switches: Limiter, Compressor, Tube Drive, Tuner Mute
Input sensitivity (mV): 80
Master outputs: Speakon, 1/4" (x2)
Line out: (type/configuration): XLR (Pre/Post switchable)
Line out sensitivity (Vrms): 1.0
Effects Footswitch/Function: Tube Drive/Effects Loop
Effects Return sensitivity (Vrms): 1.0
LED Indicators: Power, Tube Drive, Compressor, Mute, EFX Rtn
Protection: Thermal, Short Circuit
Limiter/Switchable: Yes/Yes (Output Clip Limiter)
Dimensions: 21"W x 8.5"H x 16"D
Weight: 47 lb.
Reviewed by 2 customers
Displaying reviews 1-2
This amp is a monster. The tone, especially in the tube mode is fantastic and the overdrive is killer. It has more shaping capabilities then you would ever need in 10 lifetimes, plus the power to knock your head off. I have used this for loud outdoor gigs and never turned the volume past 6. I would be afraid to be in the same neighborhood with this thing on 10. Yorkville/Traynor's customer service is great, too. I have contacted them with questions and received fast, helpful advice. Overall, this is the best bass amp you could hole for at any price. Trust me, I've had a bunch of different amps and they all fell short of this one.
WOW .All were great, but the value and features on this just RAWKS !!!!!Having said that. Yes this is my third and why?, well like a fool i traded , bought and sold other brands .I was always too worried to see a name brand on the stage than what i really needed.Not that the others are not worthy, they are, but for the price and features, you can't go wrong.You get it all in here, the girth of an SVT, the clarity of an Eden . I am surprised to why bass amgs and top players don't try this sucker out ?