- 270375 000000000 270375000000000
Electro-Voice RE2-410 Wireless System with RE410 Handheld Microphone
- Write a Review
The RE-2 Series Wireless Microphone System brings sophisticated professional features to an affordable price point. It includes the RE-2 Receiver and...Read More
The RE-2 Series Wireless Microphone System brings sophisticated professional features to an affordable price point. It includes the RE-2 Receiver and the HTU2 handheld Transmitter. The RE-2 is a completely programmable frequency agile system with one-touch Auto-ClearScan, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features.
The HTU2 handheld transmitter in this package comes with the RE410 Microphone element. It is housed in a rugged high impact ABS plastic handle One button on/off/mute button makes the HTU2 easy to use and the smart battery feature makes it easy to maintain.
RE2-410 Wireless System with RE410 Handheld Microphone
- RE-2 reciever
Controls: On/Off, Set, Up, Down, Audio Line Level Output
Displays: Group/Channel, Frequency, Diversity, AF meter, RF meter
Connector Type: 1/4" unbalanced
Connector Type: 3-pin XLR
Antennas: External 1/4" wave detachable
Audio Frequency Response: 50Hz - 15kHz +/- 2dB
Distortion (@ 1kHz, 40 kHz deviation): < 1 %
Diversity: Digital Posi-Phase True Diversity
Dynamic Range: > 100 dB
FCC Type Acceptance: Approved under Part 15
Number of channels: 1112 possible (programmable in 25kHz steps) per band
Squelch: Tone Code plus Amplitude
Case Material: Steel
Dimensions (HxWxD): 43.7 x 190.5 x 150 mm, (1.72" x 7.5" x 5.91")
HTU2 handheld transmitter with RE410 Microphone Element
Displays: Group/Channel, Frequency, or Battery Level
Antennas: Internal 1/2 wave
Battery Life: 8 hours with Alkaline typical
Mic Type: Handheld
Power Requirement: 9V Battery
RF Output: 5mW or 50mW selectable
Case Material: High-Impact ABS
Dimensions (Height X Max Diameter): 268 x 52 mm, (10.55" x 2.05")
Microphone Applications: Female Vocal, Jazz, Male Vocal, Rock, Speech
Review Snapshot®by PowerReviews
Reviewed by 1 customer
Displaying review 1
- Rich sound
- Solid Wireless
- Worth the money
- Slightly Elevated Bass
- Live performance
Comments about Electro-Voice RE2-410 Wireless System with RE410 Handheld Microphone:
My RE410 wireless arrived yesterday. I put it through about 2 hours of testing. First, my experience level. I own/use Shure SM and Betas, EV PL84's (still my favorite wired mic) and EV 767a. I play guitar and sing...
Wireless system:... ROCK SOLID. Crystal clear. I literally went to the opposite end of the house and had someone listen to me. Then walked outside and came in the back door. Not one crack or drop. Granted, you aren't going to do this in a performance, but I wanted to test the tx/rx range.
Microphone exterior... body is light, but feels solid enough. In and out of the mic clip is easy enough.
Mic electronics... I pushed the gain on the mic more that I would normally so that it was reading at the top of the AF meter (+3db) and even possibly overdriven slightly. Still sounded good.
Mic sound... this mic sounds very rich. I did a side-by-side with a 767a. When pushed hard, the 767a could get harsh, where this one could get a little boomy. It is subject to some bass proximity effect but not terribly. It is clearly more responsive to vocal bass frequency (around 100 MHz) that a 767a. This isn't bad, and in fact, I like the sound.. but one should be aware of it.
Feedback: I setup a Mackie SRM350 and shot it straight at my face from 8 feet away while I practiced. It was as good as any of my other quality mics at rejecting feedback. By the time it was giving me issues, my guitar and my other mics were doing the same thing.
I will be using this for a live performance tonight. More info to come.
4 stars is really just my lack of experience with it. If I change my mind after using it live, I will update my reviews.
- Was this a gift?: