- Product 270017
AKG CK55L LAVALIER MIC FOR WIRELESS SYSTEMS
- Write a Review
The AKG CK 55 L Lavalier microphone is a low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc....Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
An ideal choice for situations requiring an inconspicuous microphone and maximum mobility for the user
The AKG CK 55 L Lavalier microphone is a low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. It Connects to AKG bodypack transmitters. The CK 55 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass roll off combine to suppress unwanted ambient noise. Includes attachment clip and windscreen.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- Inconspicuous clip-on microphone
- Cardioid Polar Pattern
- Bass Roll Off
- Natural, airy sound
- High ambient noise rejection
- Includes Mic attachment clip and W55 windscreen
Get professional with your presentations. Order today!
- Polar pattern: cardioid
- Frequency range: 15 to 18,000 Hz
- Sensitivity: 8.8 mV/Pa (-41 dBV)
- Max. SPL: 118 dB (k=1 %)
- Equivalent noise level: 34 dB-A
- Signal/noise ratio (A-weighted): 60 dB
- Impedance: 200 ohms
- Recommended load impedance: >2000 ohms
- Supply voltage: 1.5 to 10 VDC or 9 to 52 V phantom power to DIN/IEC using MPA III L
- Powering: <2 mA
Connector: 3-pin mini XLR
- Cable: 1.6 m (5 ft. 4 in.)
- Finish: matte black
- Net weight: 2.5 g (0.08 oz.)
- Shipping weight: 115 g (4 oz.)