Matrix 600 PA System

Features

• 7-band master EQ section with slide potentiometers
• LED meters display left and right channel output power levels
• Conveniently located master level control with a large knob
• Level control for monitor output

• Output stage with discrete, high current output devices - not integrated IC amps
• Output power of 2 x 300W RMS with high headroom
• Very efficient cooling, utilizing a large heat sink and two direct-flow fans with variable speed control for quiet operation
• Power supply with low-noise toroidal transformer and a dual voltage (115/230Vac) selector switch
• Comprehensive amplifier and speaker protection circuitry to guard against short circuits, DC offsets, over-heating, turn-on thumps, and subsonic and supersonic frequencies.
• Built-in high quality stereo clip limiter
• Equalization customized to enhance and optimize speaker system performance.

• Four channels (Ch. 1-4) with balanced, combo 1/4" & XLR mic inputs & balanced 1/4" jack line level inputs
• 48V/DC phantom power on balanced combo 1/4" & XLR inputs for condenser microphones
• Phantom power can be switched on/off separately on two pairs of inputs
• The phantom power on/off switches are securely recessed behind the front panel to avoid accidentally switching them on/off
• PAN, 3-band EQ, monitor level and effect level controls on each channel
• Stereo input channel (Ch. 5) with high impedance 1/4" stereo input can also be used for mono acoustical instruments with a pick-up or as an extra mic using the combo 1/4" & XLR connector
• Stereo 1/4" input with a high |Z| input impedance to connect variety of stereo sources
• Combo 1/4" & XLR inputs to connect either mono acoustic instrument with a pick-up via the 1/4" TRS connector or low impedance dynamic mic via the XLR connector
• Pan/Balance, 3-band EQ, monitor level and effect level controls
• Stereo input channel (Ch. 6) for stereo sources
• Dual stereo inputs with 1/4" TRS and 3.5mm mini-jack to connect any 2-channel source
• 3-band EQ, monitor level and effect level controls
• House input with stereo RCA connectors and a dedicated level control
• This input is located within the Ch. 6 section but is, in fact, a totally separate 7th input for a stereo house source such as a CD player

• 3-way rear-ported speakers substantially outperform traditional 2-way designs in virtually every application
• 10" high excursion woofer for extended and tight bass
• 6.5" midrange with oversized magnet for clarity and wide coverage area
• 1" exit phenolic tweeter on an exponential horn matches the acoustic response of 6.5" midrange driver
• Premium quality crossovers with air core inductors and Mylar capacitors for clean and unrestricted SPL peaks
• Light bulb protection circuitry on the tweeters for worry-free operation
• Built in suspension points for permanent installation
• 16-gauge steel grilles, rubber feet and a conveniently located top handle

• Two 20' speaker cables (with 1/4" plugs)
• Two speaker covers
• One mixer/amplifier carrying bag