The TwinQ2 dual studio channel from Joemeek brings outstanding audio quality to both project and professional studios. Each channel is built around a transformer-based mic input, musical three-band EQ and the classic Joemeek optical compressor, the TwinQ2 gives you full vintage vibe plus the ability to output 24-bit/96kHz digital audio to your DAW. It's the perfect way for project studios to add some major sonic muscle and for larger studios to offer a broader range of options to customers.
Double up with the TwinQ2 dual studio channel from Joemeek
Hear the difference a great studio channel can make. Order yours today.
TwinQ2 2U Dual Channel Strip
- Input impedances: Mic: 1.2kohm; Line: 10kohm
Pre-amp overall gain: -2dB to 60dB (variable) Common mode rejection: 70dB Equivalent input noise: -128.5dBu (unweighted) Distortion: 0.001% (below Compressor threshold) Frequency response: 10Hz to 70kHz (-3dB) Maximum input before clipping: Mic: +24dBu; Line: +45dBu Headroom before clipping: +29dBu Compressor threshold: -6dBu to +22dBu (variable) Compressor ratio: 1:1 to 10:1 (variable) Compressor attack time: 1 msec to 100 msec (adaptive) Compressor release time: 0.1 sec to 3 sec (adaptive) Nominal output levels: +4dBu/-10dBv Output impedance: 75ohm Output Level switch: 12dB attenuation Noise Floor: -85dBu (typical, with 40dB mic gain) VU Meter: Analog movement Power supply: 115V / 230V ac mains, 50/60Hz Power consumption: 30W Mechanical: 19x3.5x8.66" (overall) Weight: 6.5 lb High Pass Filter: 12dB per octave cut below 80Hz EQ Boost & Cut: +/-15dB (zero phase-shift bell response) LF Frequency : 40Hz to 650Hz variable Mid Frequency : 300Hz to 5kHz variable HF Frequency : 6kHz/12kHz switchable EQ "Q" 0.9 (1.6 octaves Digital Output Specifications Sampling: 24 Bit Resolution: 24-bit delta sigma using Wolfson WM8738 ADC Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable Output Formats: S/PDIF electrical, S/PDIF Optical Noise Floor: typically 92dB A-weighted (referenced to 0dBFS = +18dBu). So for a +4dBu signal, the SNR is 78dB Distortion: typically 0.01% @ 0dBu (20Hz - 20kHz) at 96kHz sample rate, 0.02% @ 0dBu (20Hz - 20kHz) at 48kHz sample rate and 0.02% @ -1dBFS (20Hz - 20kHz) at all sample rates Crosstalk: typically -67dB (20Hz - 20kHz)