- Product H99456
M-Audio BX8 D2 Studio Monitor (Each)
- Write a Review
The BX Series studio monitors from M-Audio are a trusted set of nearfield speakers in home and project studios around the world. The next-generation ...Read More
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Next-generation BX Series studio monitors.
The BX Series studio monitors from M-Audio are a trusted set of nearfield speakers in home and project studios around the world. The next-generation BX8 D2 monitors features a bi-amplified design with 130 watts of distributed power, 8” low frequency drivers with Kevlar cones, 1-1/4” high-frequency drivers with natural silk domes and integrated waveguides, and optimized rear ports for an extended low-frequency response. Set a pair of BX8 D2 monitors in your sweet spot today and enjoy a clear and accurate translation of your mixes.
Accurate and enjoyable
Whether you’re recording, mixing, or mastering, your monitors are your primary reference source. Accurate monitors let you hear exactly what’s happening in your mixes—and give you the assurance that your music will translate well to other listening environments. The M-Audio BX8 D2 monitors leverage a decade of monitor engineering expertise to deliver exceptional transparency and sonic definition—allowing you to enjoy marathon mixing sessions with minimal listening fatigue.
Designed for pros—and beginners
Countless pros use M-Audio studio monitors to produce and mix the music and audio you hear every day. The BX D2 series makes that same design philosophy and technology available to anyone with a passion for great sound. BX8 D2 helps you understand what’s in your mix so you can make better decisions about how it will translate across a wide variety of systems—from MP3 earbuds to car stereos to audiophile rigs.
Silk-dome, waveguide-loaded, high-frequency drivers
M-Audio high-frequency domes are made from natural silk to counter the audible ringing that is inherent in the poorly crafted metallic materials often found in other monitors. The high-frequency driver is fully isolated from the rest of the enclosure to ensure minimum distortion, providing ultra-smooth frequency response up to 22 kHz. It also features a built-in waveguide, which offers an expansive sound stage and exceptional imaging.
Kevlar low-frequency drivers
To insure a lifetime of service, we constructed the BX8 D2 monitor’s 8” low-frequency driver from woven Kevlar. Kevlar’s high mechanical and thermal resilience makes it ideal for use in speaker cones. Our engineers also created a curved conical design that improves room dispersion. High-damping reliable rubber surrounds provide percussive musical bass, and insure that the cone reaches its optimal excursion for accurate reproduction. And our high-temperature voice coils reduce power compression, guaranteeing that your monitors will deliver full performance hour after hour.
Rear-ported cabinet design
The BX8 D2 cabinet is integrally designed with its other components for optimal performance—right down to rounded corners for reduced edge diffraction and superior imaging. The custom rear port is designed to minimize air turbulence and resulting distortion while adding additional low frequency extension.
The Class A/B bi-amplified design dedicates separate power amps to the high and low frequencies—providing ample headroom for even the loudest and most dynamic of mixes. Combined with a finely tuned crossover, the design ensures that each driver only delivers the frequencies that it can reproduce most efficiently, resulting in tonal accuracy and cohesive sound across the entire frequency spectrum.
Find the sweet spot quickly and easily
When monitoring, it’s important to sit in the middle position or “sweet spot” between the two speakers—where the stereo image is optimized. BX8 D2 features a pinhole power LED that makes finding the sweet spot easy. You’ll know you’re in the right listening position when the BX8 D2 LEDs appear to be brightest.
- Bi-amplified design with 130 watts of distributed power
- 8” low-frequency drivers with Kevlar cones
- 1-1/4” high-frequency drivers with natural silk domes and integrated waveguides
- Optimized rear ports
Order a pair of improved BX8 D2 monitors today!
BX8 D2 Studio Monitor (Each)
- Frequency response 38Hz-22kHz
- Crossover frequency 2.2 kHz
- Low-frequency amplifier power 70 watts
- High-frequency amplifier power 60 watts
- Maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
- Polarity positive signal at + input produce outward LF cone displacement
- Input impedance 20 k ohms balanced, 10 k ohms unbalanced
- Input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
- Power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
- Protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
- Cabinet vinyl-laminated MDF
- Size 12” x 10” x 15”; 30.48cm x 25.4cm x 38.1cm
- Weight 26.4 lbs./unit; 11.97 kg