Skip to main content Skip to footer
Save up to 15% with code: PRESDAY18
Looking for Coupons?Call us (877) 509-9963 Hablamos Español
MF MD HG01 February Clearance 02-03-18

Mackie HR624mk2 Studio Monitor 2010

  • Write a Review
Product H82564
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

The Mackie HR624mk2 high-resolution Active Studio Reference Monitor is the perfect alternative when space is limited. The HR624mk2 monitor offers the...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
Don't Forget

A THX-approved, 6" high-resolution active studio monitor that offers powerful, accurate mix guidance.

The Mackie HR624mk2 high-resolution Active Studio Reference Monitor is the perfect alternative when space is limited. The HR624mk2 monitor offers the same design as the Mackie HR824mk2 in a more compact package. The new Zero Edge Baffle minimizes diffraction for a crystal clear audio image of your mix, and controls sound waves for wide, even dispersion. The Mackie HR624mk2 monitor's Acoustic Space, LF roll-off and HF controls let you easily tailor the sound to suit your space and your taste. Thanks to remarkably linear frequency response, with the HR624mk2 monitor, you always get accurate mix translation. Combine all this with superior bass extension, and the Mackie HR624mk2 monitor makes your studio's sweet spot a full-on sweet zone.

High-resolution Active studio reference monitor
Ultra-linear frequency response for accurate mix translation
6.7" high-precision, low-distortion LF transducer
1" titanium dome, ferrofluid cooled tweeter
Optimized Waveguide for wide, even sweet zone
Twin FR Series amps - 100W for LF / 40W for HF
Cast aluminum Zero Edge Baffle minimizes diffraction
Full internal damping eliminates midrange artifacts
Passive radiator provides tight, articulate bass extension down to 45Hz
Acoustic Space, LF roll-off, and HF controls
Balanced XLR, TRS, and unbalanced RCA inputs
OmniMount ready for easy wall/ceiling placement
THX pm3 certified for surround sound applications
Perfect for High-Definition audio, cinema and gaming systems
Acoustic Section
Free-Field Frequency Response: &plsumn;1.5dB, 49Hz to 20kHz
Lower cutoff frequency: -3dB @ 45Hz
Upper cutoff frequency: -3dB @ 22kHz
Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
Maximum peak SPL per pair: 115dB SPL @ 1m
Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 106dB SPL @ 1m
Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

Rated Line Input Voltage and Power:
(Power consumption):
Standby mode: 12 watts
Quiescent (idle): 20 watts
Musical Program, Loud mix: 105 watts
Both channels driven into resistive loading to 1% clipping
(LF 86W/4?, HF 38W/8?): 255 watts

US: 120 VAC, 60Hz
Rated Power (For UL-6500, CSA-E65-94, EN-60065): 130 watts

Amplifier Section
(Low-frequency power amplifier)
Rated Power (at 1kHz with 1% THD): 100 watts
Rated Load Impedance: 4 ohms
Rated THD (1W to -1dB of rated power): 0.1 %
Slew Rate: 15V/S
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%

(20Hz-20kHz, unweighted, referenced to 100W into 4?): > 101dB
Cooling: Convection
Design: Monolithic IC, Class AB, Parametric Servo Feedback

(High-frequency power amplifler)
Rated Power(at 1kHz with 1% THD): 40 watts
Rated Load Impedance: 6 ohms
Rated THD (1W to -1dB of rated power): 0.1 %
Slew Rate: 15V/S
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 93dB
Cooling: Convection
Design: Monolithic IC, Conventional Class AB

System Specifications
Input Type: Balanced Differential (XLR and 1/4" TRS), Unbalanced (RCA)
Input Impedance: 20 k? Balanced, 10 k? Unbalanced
Input Protection: RFI and Level Protected
Maximum Input Level: +20dBu
Low Frequency Filter: 80Hz, 2nd Order, Butterworth
HF Equalization: Shelving ±2dB @ 10kHz
Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) Flat

Independent high and low-frequency overload detection
Enclosure Alignment: 6th Order
Over Excursion Prevention: 2nd Order High-Pass Filter
Low Line Voltage Shut Down: 60% of Nominal Line
Thermal Protection: Amplifier Shut-Down, Auto Reset
Muting: 5 seconds at turn-on
Signal Sense Threshold: -74dBu (0.155 mV)
Driver Protection: Independent LF and HF Detection, Overall Compression

Low-frequency driver:
Diameter: 6.7 inches (170mm)
Sensitivity (2.83V, 1m): 89dB SPL
Nominal Impedance: 4 ?
Voice Coil Diameter: 1.25" (32mm)
Power Handling (Long Term/Program): 50/150 watts
Frequency Range: 45Hz to 6kHz
Frame: Die-cast magnesium
Magnet: Ferrite
Fully shielded: Ferrite opposing magnet
High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
Nominal Impedance: 6?
Power Handling (Long Term/Program): 20/50 watts
Frequency Range: 1.6kHz to 22kHz
Diaphragm/Suspension: Titanium with polymer suspension
Voice Coil Diameter: 1.0" (25.4mm)
Magnet: Neodymium
Bucking Magnet: Ferrite opposing magnet

Passive Radiator: 6" x 9" (152mm x 228mm) mass-loaded elliptical flat piston with variable thickness filleted-edge rubber surround
Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 3kHz

Materials and Construction:
3/4" (19mm) thick MDF cabinet construction with internal bracing to add to cabinet stiffness
Piano-black gloss finish
Die-cast aluminum exponential wave guide for controlled, wide dispersion from high-frequency driver and Zero Edge Baffle to minimize diffraction around the cabinet edges
Open cell adiabatic "foam fill" acoustical damping material absorbs internal reflections, preventing delayed sound coloration
Flush-mount connector system allows monitor to be placed against a wall without need for connector clearance

Physical Properties
Height: 13.1"/33.3cm
Width: 8.6"/21.9cm
Depth Enclosure: 10.3"/26.2cm
Depth Overall: 12.6"/31.9 cm
Internal Volume: 0.29 cubic feet (8.2 liters)
Weight: 23.4lb./10.6kg
See All Mackie Powered Studio Monitors
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.