Up to 25% Off Select Gear With Code: SPOOKY
Looking for Coupons?Call us Hablamos Español
MF MD HG Virginia No Tax
Shure Logo
SKU 
H68493 000000000

Shure PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic

  • Write a Review

The PGXD14/Beta98H Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for ...Click To Read More About This Product

In Stock & Ready To Ship

Gold Coverage: (What’s This?)
  • Shipping (48 Contiguous U.S. States)
    FREE
  • Your Price :
    $4790.00
  Add to Cart
Add to Wish List

Earn up to 3,832 reward points.

Special Financing Offer
Musician's Friend Platinum Card

Special -month financing. Valid through 11/01/2017
Get DetailsAbout Special Financing Offers

  • REBATE

    Trade In & Save!

    Get up to $500 for trading in a qualified 600 MHz Band wireless system!See Details

    Offer expires 04/30/18

    Download Rebate
See All Shure Combo Wireless Systems
OVERVIEW

Mic-up horns and percussion instruments with this convenient, quality wireless mic system.

The PGXD14/Beta98H Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta 98H/C, a precision-engineered miniature cardioid condenser microphone with integrated clip and gooseneck for horn applications, as well as a PGXD1 bodypack transmitter, and a PGXD4 receiver.

The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shockmount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.

The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES
PGXD1 Transmitter with WA302 Instrument Cable
Rugged, compact bodypack with belt clip and instrument cable
20Hz - 20kHz frequency range captures every nuance of your tone
Power, mute, and battery status LED
Up to 10 hours of continuous use from 2 AA batteries
200' (60m) operating range
26dB of continuously adjustable gain to match variable input levels

PGXD4 Wireless Receiver
24-bit / 48kHz digital technology for incredibly accurate sound
Automatic frequency selection locates a clear channel instantly
One-touch sync automatically syncs the transmitter and receiver
True digital diversity delivers rock-solid wireless signal reliability
Up to 5 systems can be used at once
1.4" and XLR audio outputs
Included padded carrying case for portability and protection

Beta 98H/C
1.6m hard-wired cable
Tailored frequency response for open, natural sound reproduction
Compact, lightweight construction provides a low degree of visibility
Interchangeable microphone cartridges are available:
RPM108 - Cardioid cartridge
RPM110 - Supercardioid cartridge
SPECIFICATIONS
PGXD1 transmitter/strong>
Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
Gain adjustment range: 26dB
Input impedance: 1MÎ
RF Output Level: 10 mW maximum (dependent on applicable country regulations)
Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75")
Weight: 128g (4.5oz.) without batteries
Housing: Molded polycarbonate case
Power requirements:
Battery Life: Up to 10 hours

PGXD4 receiver
Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
Weight: 289g (10.2oz.)
Housing: ABS
Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
Impedance:
XLR: 50Î
1/4": 50Î
Sensitivity: -102 dBm @ 10-5 BER
Image rejection: > 70dB, typical
XLR output:
Impedance balanced Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Audio LED:
Red: 2dB below clip
Amber: 12dB below clip
Green: 50dB below clip
Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground

Beta 98H/C
Type: Condenser (electret bias)
Frequency response: 20 to 20,000Hz
Polar pattern: Unidirectional (cardioid)
Output impedance: Rated at 150Î (actual)
Recommended minimum load impedance: 1 kÎ (May be used with loads as low as 150Î with reduced clipping level
Output Level (0 dB = 1 volt per Pascal):
Open Circuit Voltage: -56dB (1.6mV)
Output Clipping Level (at 1kHz, THD < 1%):
2.5kÎ load: 11dBV (3.5V)
1.0kÎ load: 3dBV (1.4 V)
Maximum SPL:
2.5kÎ: 163dB
1.0kÎ load: 155dB
Dynamic Range (maximum SPL to A-weighted noise level): 132dB (2.5kÎ load)
Signal-to-noise ratio: 63dB at 94dB SPL (IEC 651)
Polarity:
Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
Recommended Operating Voltage: 11 to 52 Vdc Phantom
Environmental conditions: Operating temperatures: -7 C to 49 C (20 F to 120 F)
Storage temperatures: 29 C to +74 C (-20 F to 165 F)
Relative Humidity: 0 to 95%
Net Weight: Microphone w/cable and preamplifier: 156g (5.5oz.)
Reviews
Loading....

Review Snapshot

by PowerReviews
ShurePGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(4 of 4 customers found this review helpful)

 
5.0

sax mic

By tnsaxlvr

from East Tennessee

See all my reviews

Comments about Shure PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic:

I have had mine now for several months and have enjoyed it. This mic works well for my tenor sax. I wind the extra wire around the bell of the horn and attach the sending unit to my lower pad guard and it is completely wireless and out of the way. Works great.

Displaying review 1

Back to top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.