Quik-Lok ZM-99 Caster Kit for Z Stands and Workstations
- Write a Review
- SKU
- #450099000000000
-
- MSRP:
- $28.36
-
- Your Savings:
- - $15.37
-
- Your Price:
- $1299
-
res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
-
res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
-
res13061819682058555857305Quik-Lok Z-70 Width and Height Adjustable Z Keyboard Stand $200.19 - $219.99
res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
-
res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
- res13061819682058555857305
Hit the road.
The Quik-Lok ZM-99 caster kit puts wheels on any Z stand or workstation for easier movement. The wheel kit includes 2 locking and 2 non-locking casters and is simple to install. Fits all Quik-Lok Z stands and workstations.
Note: Please allow for an additional 2.5" to the height of stand when using ZM-99 caster kit.
Go from one stage to the next with no fuss. Order now!
Review Snapshot®
by PowerReviews(based on 3 reviews)
Ratings Distribution
Reviews
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
Cons
- Not Functional
Best Uses
Comments about Quik-Lok ZM-99 Caster Kit for Z Stands and Workstations:
If any one buys these you need to purchase 8mm coarse thread nuts. It seams the threads are metric. They don't come with the wheels
Pros
- Works as described
Cons
- Extra parts required
- Extra work required
Best Uses
Comments about Quik-Lok ZM-99 Caster Kit for Z Stands and Workstations:
To get it to work with the Z-726, you'll also need 8 x M8 flat washers, 4 x M8 Split Washers, and 4 x M8x1.25 Nuts (Home Depot or similer). Pull the Rubber "feet" and the end caps, slide a flat washer on and put the caster in the hole, put a 2nd flat washer, then a split washer and nut. Tighten. Put the end cap back on and repeat for the rest. Took about 15 minutes and all works perfectly ;-D
Comments about Quik-Lok ZM-99 Caster Kit for Z Stands and Workstations:
The picture on the MF web site and on the Quik Lok site are different. The QL site has a nut on each threaded shaft on the caster. The Z726 stand does not have threaded hole on the bottom in which to mount these caster, so they don't work at all. Not sure which stand they are supposed to work on, but not on the QL Z726. So since it doesn't work at all, it gets as close to zero as I can make it.
Displaying reviews 1-3
