• Shop by Department
  • Hot Deals

6-12 Month Financing

SKB Roto Rack Console - Audio and DJ Rack Case 10X4 

  • Write a Review
SKU 
#712866000104000
Best Seller

Overview

  • 10U slanted rackmount on top
  • 4U rackmount in front
  • Hard lid and doors
Description & Specs
  • MSRP:
    $344.99
  • Your Savings:
    - $125.00
  • Your Price:
    $21999

In Stock & Ready To Ship

+ Add to Wish List
See All SKB Rackmount Cases
Also Consider
Also consider
      SKB

      An audio and DJ rack that's built to last.

      The SKB Roto Rack Console Case is a 10U, slanted top and a 4U, front rack case that features steel threaded rails, a hard lid and doors, side access ports for cable routing, and has enough space to mount SKB's AV-8, 8-Space Audio/Video Shelf (not included) with the lid closed. The Audio & DJ console case's one-piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors, and lid are injection-molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to your rackmounted audio equipment and DJ gear. Two TSA locking, SKB-patented trigger latches secure the lid while the flat hardtop allows for stacking in transport and in storage.

      Features

      • 10U slanted rackmount on top
      • 4U rackmount in front
      • Hard lid and doors
      • Side-access ports for cable routing
      • Injection-molded front and rear doors and lid
      • 2 TSA locking, patented-trigger latches
      • Stackable for storage and transport

      Get a tough, TSA locking audio/DJ rack case to serve and protect. Order today.

       

      Roto Rack Console - Audio and DJ Rack Case Specifications:

      • SKB Roto Rack DJ Console Case Dimensions:
      • Exterior length: 23-1/4"
      • Exterior width: 23-1/2"
      • Exterior depth: 17-3/4"
      • Rack space units top: 10
      • Rack space units bottom: 4
      • Rack depth rail to rail: 6"
      • Rack depth front rail to back lid: 19-1/2"
      • Product weight: 24 lb.
      • Note:
      • Rack depth is listed at 6" and that is referencing the top of the rail on the slant portion of the case. At the bottom of the rail, the depth is 3.75". If nothing is mounted in the 4 spaces on the front, then the actual depth at top of the slant rail would actually be 13.5". After the first 3" from the bottom of the slant rail (and with nothing mounted in the 4 spaces on the front), the depth is 11.75". Product weight is without the optional (sold separately) 1SKB-AV8. The 1SKB-AV8 weighs 6 pounds.
      Customer Reviews
      Loading....

      Review Snapshot®

      by PowerReviews
      SKBRoto Rack Console - Audio and DJ Rack Case
       
      4.0

      (based on 8 reviews)

      Ratings Distribution

      • 5 Stars

         

        (4)

      • 4 Stars

         

        (1)

      • 3 Stars

         

        (2)

      • 2 Stars

         

        (1)

      • 1 Stars

         

        (0)

      Reviewed by 8 customers

      Sort by

      Displaying reviews 1-8

      Back to top

       
      3.0

      My Best Option

      By Alex Edwards

      from Minnesota, U.S.

      About Me Experienced

      Ask me a question

      Verified Buyer

      Pros

      • Easy To Carry
      • Light weight

      Cons

      • Bulky

      Best Uses

      • Everyday
      • Practicing
      • Travel

      Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

      Most racks you will find are HEAVY. I looked everywhere for something different. I finally decided on this rack because of its weight. It is only 24 pounds! That is half the weight of some racks the same size. I have loaded up this rack with a mixer and many extras including a very heavy amplifier so light weight is key. I did end up putting a couple of little shims underneath the amp to take some of the pressure off of the front because I could tell the plastic was actually bending at the weight.

      When I received it I found that it was larger than I thought it was going to be. The rack is very deep so it is not the greatest when you're plugging in cords every gig.

      Finally, I am quite gentle with my gear. If you were throwing this thing in and out of vans and stages each week I could see something colliding with the rack and breaking it. It's not as sturdy as the wood cases with twice the weight. So decide if you want to eventually break the shell or break your back! Due to the plastic it can also get scratched up quite easily.

      Overall I am happy with it. I wish it was sturdier but for my purposes it's what I needed.

      Comment on this review

       
      5.0

      UPGRADED CASE IS EXCELLENT

      By PDOCDJ

      from Abilene Texas

      About Me Professional Musician

      Verified Buyer

      Pros

      • Good Protection
      • Sturdy

      Cons

        Best Uses

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          The new hard shell top is a definite improvement over the soft cover top. The front "door" is hinged to the top. The back door has slots in the case for added solidity. Latches are solid and firm and can be locked for transport, but airport security can unlock them with their own TSA encoded keys, cool. Comes with screws to anchor in your equipment. One curious note: the top rail ends about 4 inches from the back side of the box. Would have been nice to extend that further, then again it would be a 14 top, 6 bottom, duh. Great case. Just wish it was available in a wheeled version. Load this up and it's heavy.

          Comment on this review

          (0 of 1 customers found this review helpful)

           
          4.0

          Hack Bartley

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          8
          No problem with the SKB 10x4 case. As advertised. Quick deliery.

          Comment on this review

          (1 of 1 customers found this review helpful)

           
          5.0

          Great case for any mobile DJ.

          By Charles Basile

          from New City, NY

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          Overall, I like this case adn would highly recommend to others.
          This case has it all... its light, totally sealed when closed to keep out dust and weather, full 19" rack support into metal rack rails. Great space on top and below for additional equipment. There is a 1U space unused at the top of the rack - perfect for wires in/out and venting heat from inside the case. When the option shelf is installed, it completely folds up and into case for transport. Excellent.
          You can tell by looking at this case that it was constructed with the utmost case and the strictest ot quality standards.
          I've see other cases but I believe the value this case gives you greatly out weighs all others. You won't be disappointed.

          Comment on this review

          (0 of 3 customers found this review helpful)

           
          2.0

          Poor design

          By Tony Granito

          from Tucson, Arizona

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          I bought this rackmount case with the optional rack for a computer. The designer did not allow space for the laptop computer and I have a very slim laptop computer. Therefore, the cover does not fit. That is the most import part because the computer must be protected. Plus the first night out, the right side latch broke. I don't have the time nor want to expend the effort to do a return. Especially since I spent a whole day putting in the Furman and other rackmounted add ons and organized and velcroed the wiring. I have a large DJ Company in Tucson, Arizona and if this case worked out right I was going to buy 24 of them. A word to the designers, please test your product before sending it to the manufacturer.
          I bought this rackmount case with the optional rack for a computer. The designer did not allow space for the laptop computer and I have a very slim laptop computer. Therefore, the cover does not fit. That is the most import part because the computer must be protected. Plus the first night out, the right side latch broke. I don't have the time nor want to expend the effort to do a return. Especially since I spent a whole day putting in the Furman and other rackmounted add ons and organized and velcroed the wiring. I have a large DJ Company in Tucson, Arizona and if this case worked out right I was going to buy 24 of them. A word to the designers, please test your product before sending it to the manufacturer.
          I bought this rackmount case with the optional rack for a computer. The designer did not allow space for the laptop computer and I have a very slim laptop computer. Therefore, the cover does not fit. That is the most import part because the computer must be protected. Plus the first night out, the right side latch broke. I don't have the time nor want to expend the effort to do a return. Especially since I spent a whole day putting in the Furman and other rackmounted add ons and organized and velcroed the wiring. I have a large DJ Company in Tucson, Arizona and if this case worked out right I was going to buy 24 of them. A word to the designers, please test your product before sending it to the manufacturer.
          I bought this rackmount case with the optional rack for a computer. The designer did not allow space for the laptop computer and I have a very slim laptop computer. Therefore, the cover does not fit. That is the most import part because the computer must be protected. Plus the first night out, the right side latch broke. I don't have the time nor want to expend the effort to do a return. Especially since I spent a whole day putting in the Furman and other rackmounted add ons and organized and velcroed the wiring. I have a large DJ Company in Tucson, Arizona and if this case worked out right I was going to buy 24 of them. A word to the designers, please test your product before sending it to the manufacturer.

          Comment on this review

          (1 of 1 customers found this review helpful)

           
          5.0

          Awesome Investment

          By Justin Pitlik

          from Wisconsin

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          This Audio and DJ Rack Case was absolutely worth every penny. Not only does it protect my gear, but it looks professional, and hides the over-abundance of cables, ext. cords, etc. I recommend this to anyone looking to upgrade and go more professional.

          Comment on this review

          (0 of 1 customers found this review helpful)

           
          3.0

          Not so great!

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          I did call SKB about my problems and they would have helped. Which meant sending stuff directly back to them and they would fix or replace. I simply dont have time for all that. I would have liked them to send me out a new hinge and I would have put in on correctly, but they could not do that. I am pretty crafty and was able to fix the problems my self. For the lid, I just drilled little holes along the outside of the crack and used zip ties. The case now has character and looks like it has stiches. Old trick I learned for the quad runners fenders and stuff when you wreck and need to put things back together real fast. For most I think SKB would be great in helping if you have time for all that. When I order stuff it is usually because I need it now, not later. I think I will continue to use the likes of Gator cases and maybe some others. Done with SKB.
          With the addition of the shelf, which has to be ordered seperately it is a great idea. Lightweight and I can cram my whole rig in here.
          Not to happy here. SKB used to be practically bullet proof. Not so much any more. The bottom half which is most important is constucted pretty good, but the lid is crap and broke easily. Cheap plastic. The lid is a pretty important part since usually damage occurs to your gear while transporting. They should have used better quality material. If they wanted to make things right they should make a better lid available for replacement. Also, I think there quality control must suck. I have purchased 4 different SKB products in the last year and am only happy with 1. Which is the SKB Studio Flyer 2U. The rest have hardware such as hinges and latches mounted incorrectly.
          Idea is great but the quality of there product now is just hindered.

          Comment on this review

          (1 of 1 customers found this review helpful)

           
          5.0

          Nice rack case

          By Sigmund Barocio

          from México city

          Comments about SKB Roto Rack Console - Audio and DJ Rack Case:

          It?s a very light case (lighter than a flight case), but sturdy enough to hold tight all your equipment, I carry on it two Denon dual CD players and a Pioner DJM-5000 and it fits perfectly with all cables hidden on it, because I have some free space inside the box I can carry an outlet box attached with Velcro and a pair of headphones, I totally recommend this unit.

          Comment on this review

          Displaying reviews 1-8

          Back to top

          You are changing the Ship-To country.

          Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.