Backstage Pass: Earn 8% Back in RewardsLearn More
  • Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Backstage Pass
Mackie Logo
485388 000000000

Mackie HR824mk2 Studio Monitor (2010)   

  • Write a Review

The high-resolution Mackie HR824mk2 Active Studio Reference Monitor sounds as smooth as it looks. The rounded contours of the HR824mk2 monitor's Zero...Read More

In Stock & Ready To Ship

Gold Coverage: (What’s This?)
  • List:
  • Shipping (48 Contiguous U.S. States)
  • Your Price:
  Add to Cart
Add to Wish List
See All Mackie Powered Studio Monitors
Musician's Friend Backstage Pass

Earn up to 5,600 in points.


      Turn your studio's sweet spot into a full-on sweet zone.

      The high-resolution Mackie HR824mk2 Active Studio Reference Monitor sounds as smooth as it looks. The rounded contours of the HR824mk2 monitor's Zero Edge Baffle minimize diffraction to give you a crystal clear audio image of your mix. The Mackie Optimized Waveguide delivers full, articulate mids, while the rear-firing, mass-loaded passive radiator ensures tight bass extension to 37Hz. Acoustic Space, low-frequency (LF) roll-off and high-frequency (HF) controls let you easily tailor the sound to suit your space and taste. And thanks to remarkably linear frequency response, Mackie HR824mk2 audio monitors ensure accurate mix translation. Combine all this with wide, even dispersion, and Mackie HR824mk2 monitors turn your studio's sweet spot into a full-on sweet zone.

      • High-resolution Active studio reference monitor
      • Ultra-linear frequency response for accurate mix translation
      • 8.75" high-precision, low-distortion LF transducer
      • 1" titanium dome, ferrofluid cooled tweeter
      • Optimized Waveguide for wide, even sweet zone
      • Twin FR Series amps - 150W for LF / 100W for HF
      • Cast aluminum Zero Edge Baffle minimizes diffraction
      • Full internal damping eliminates midrange artifacts
      • Passive radiator provides tight, articulate bass extension down to 35Hz
      • Acoustic Space, LF roll-off, and HF controls
      • Balanced XLR, TRS, and unbalanced RCA inputs
      • OmniMount ready for easy wall/ceiling placement
      • THX pm3 certified for surround sound applications

      Order today and hear your mixes with a new level of accuracy.


      HR824mk2 Studio Monitor (2010)

      • Acoustic Section
        Free-field Frequency Response: &plsumn;1.5dB, 37Hz to 20kHz
        Lower cutoff frequency: -3dB @ 35Hz
        Upper cutoff frequency: -3dB @ 22kHz
        Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
        Maximum peak SPL per pair: 120dB SPL @ 1m
        Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 111dB SPL @ 1m
        Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

        Rated Line Input Voltage and Power:
        (Power consumption):
        Standby mode: 8 watts
        Quiescent (idle): 18 watts
        Musical Program, Loud mix: 135 watts

        US: 120 VAC, 60Hz
        Rated Power (For UL-6500, CSA-E65-94, EN-60065): 150 watts

        Amplifier Section
        (Low-frequency power amplifier)
        Rated Power (at 1kHz with 1% THD): 150W
        Rated Load Impedance: 4 ohms
        Burst Power Output: 350W
        Rated THD (1W to -1dB of rated power): 0.1 %
        Slew Rate: 35V/S
        Distortion (THD, SMPTE IMD, DIM 100): <0.035%

        (20Hz-20kHz, unweighted, referenced to 150W into 4?): > 102dB
        Cooling: Convection
        Design: Class AB, Parametric Servo Feedback

        (High-frequency power amplifier)
        Rated Power(at 1kHz with 1% THD): 100W
        Rated Load Impedance: 6 ohms
        Rated THD (1W to -1dB of rated power): 0.1 %
        Burst Power Output: 210W
        Slew Rate: 35V/S
        Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
        Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 102dB
        Cooling: Convection
        Design: Monolithic IC, Conventional Class AB

        System Specifications
        Input Type: Balanced Differential (XLR and 1/4" TRS), Unbalanced (RCA)
        Input Impedance: 20k? Balanced, 10k? Unbalanced
        Input Protection: Rfi and Level Protected
        Maximum Input Level: +20dBu
        Low Frequency filter: -3dB @ 37Hz, 2nd-order transitional high-pass filter, -3dB @ 47Hz, 4th-order Chebyshev high-pass filter, -3dB @ 80Hz, 4th-order Butterworth high-pass filter
        HF Equalization: ±2dB @ 10kHz, shelving
        Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) flat

        Independent high and low-frequency overload detection
        Enclosure Alignment: 6th Order
        Over Excursion Prevention: 2nd Order High-Pass filter
        Low Line Voltage Shut Down: 60% of Nominal Line
        Thermal Protection: Amplifier Shut-Down, Auto Reset
        Muting: 5 seconds at turn-on
        Driver Protection: Independent LF and HF Detection, Overall Compression

        Low-frequency driver:
        Diameter: 8.75 inches (170mm)
        Sensitivity (2.83V, 1m): 91dB SPL
        Nominal Impedance: 4?
        Voice Coil Diameter: 1.6" (40mm)
        Frame: Die-cast magnesium
        Magnet: Ferrite
        Fully shielded: Ferrite opposing magnet
        High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
        Nominal Impedance: 6?
        Power Handling (Long Term/Program): 20/50 watts
        Frequency Range: 1.6kHz to 22kHz
        Diaphragm/Suspension: Titanium with polymer suspension
        Voice Coil Diameter: 1.0" (25.4mm)
        Magnet: Neodymium
        Bucking Magnet: Ferrite opposing magnet

        Passive Radiator: 6" x 9" (152mm x 228mm) mass-loaded elliptical flat
        piston with variable thickness filleted-edge rubber surround
        Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 1900Hz

        Materials and Construction:
        3?4" (19mm) thick MDF cabinet construction with internal bracing to add to cabinet stiffness
        Piano-black gloss finish
        Die-cast aluminum exponential wave guide for controlled, wide dispersion from high-frequency driver and Zero Edge Baffle to minimize diffraction around the cabinet edges
        Open cell adiabatic "foam fill" acoustical damping material absorbs internal reflections, preventing delayed sound coloration
        Flush-mount connector system allows monitor to be placed against a wall without need for connector clearance

        Physical Properties
        Height: 16.8"/42.5cm
        Width: 10.8"/27.3cm
        Depth Enclosure: 11.4"/29.0cm
        Depth Overall: 13.8"/35.1cm
        Weight: 34.6lb./15.7kg
      Ship To: US Flag
      You are changing the Ship-To country.

      Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.