Skip to main content Skip to footer
Up to 20% off with code: APRIL20
Call our Gear Advisors (877) 509-9963 Hablamos Español
MF MD HG01 Mic Month 04-05-18

Lace Alumitone Pre-Loaded Pickguard S/S/H

  • Write a Review
Product 360666
Product Price $0.00
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

The radical Lace Alumitone guitar pickups have less resistance and high output with clear, big frequency response in a completely noise-free passive ...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:

Cutting-edge passive pickups with huge sonics and totally unique look - now pre-loaded in a great-looking pickguard.

The radical Lace Alumitone guitar pickups have less resistance and high output with clear, big frequency response in a completely noise-free passive design. Constructed with aluminum rather than copper, they have a current driven design as opposed to conventional voltage-based pickups.

The aluminum water jet cut exoskeleton is matted with a micro-winding using 90% less copper wire than traditional designs for an extremely lightweight and efficient pickup. Sonically, this gives these guitar pickups more volume, more bass, and more mids with nice, clear, smooth high frequency response that cuts.

Alumitone pickups normally require a slight pickguard modification, but now you can order a cool pickguard preloaded with 3 of these awesome guitar pickups - 2 single-coil and 1 humbucker!

Lace includes a warranty card and other useful information regarding Lace Music Products.

  • Water jet cut aluminum exoskeleton
  • Noise-free current-driven design
  • Copper micro-winding
  • Lightweight and efficient
  • Passive circuitry
  • Low resistance
  • High output
  • 2 single-coils and 1 humbucker pre-loaded in pickguard

Clean, pure sounding components with lots of output and beautiful harmonics. Order now!

  • Resistance: 2.5k
  • Peak frequency: 2343
  • Inductance: 16.74 henries

Review Snapshot

by PowerReviews
LaceAlumitone Pre-Loaded Pickguard S/S/H

(based on 3 reviews)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 3 customers

Displaying reviews 1-3

Back to top

(2 of 2 customers found this review helpful)


Poor quality components...noisy, thin, lifeless humbucker

By kceltic

from Connecticut

See all my reviews

Comments about Lace Alumitone Pre-Loaded Pickguard S/S/H:

Let me start by saying this is based solely on the product. Musicians Friend has always gone above and beyond my expectations, and this was no exception. On to the review.... I was really excited about this, as I do a lot of computer recording, and mainly play through guitar processors instead of amps. I bought this in hopes to reduce/eliminate the A/C noise while maintaining most of my original tone. I installed this on a mexi strat HSS. The first one received had some light scratches on the pickups, and I could see some excess solder on the volume pot which leads be to believe it was already installed and returned. It also did not come with a jack as illustrated, so soldering is required. I went ahead and installed it anyway. Both single coils worked as advertised... very rich full tone and no noise. The volume and tone pots were pretty noisy for new, but I could live with that. The real problem came when I switched to the "humbucker". The bottom end dropped out completely, and the volume was about half of the single coils. What's worse, was there was more A/C hum than my OEM humbucker had! I also had a lot of static noise, which I attribute to the flimsy ground wire provided. (At one point, while testing through an amp I picked up a radio station loud and clear). I was able to eliminate that noise by adding a second ground from the pot to the back spring plate, but it didn t help with anything else. I could not get any bass response even with the pickup raised so close to the strings I could see them being pulled down by the magnets! I chalked this up to being a defective unit, so I returned it to M.F. in exchange for a new one. Unfortunately, the scenario was the same, except this time the selector switch was also bad. The humbucker and mid pickup out of phase position was exactly the same as the humbucker position. Needless to say, I'm very disappointed. If I were to make any recommendations, it would be to avoid the pre-wired pick guard due to sub par components. It is possible I received 2 defective units, but if the humbucker was working properly, it was the worst pickup I have ever heard. I would consider putting in one or two single coil alumitones for the noiseless, enhanced sound it produces, but that's about it. I also agree with the previous reviews that warn that the single coil tone is very different than a standard pickup. If you are looking for a radical new sound, that's fine. If you are looking for a more classic sound, stick with standard noiseless pickups. Hope this helps.

(1 of 1 customers found this review helpful)


Very Nice

By Anonymous

from Undisclosed

Comments about Lace Alumitone Pre-Loaded Pickguard S/S/H:

I install this on a Mex Strat Deluxe with vintage hardware and noiseless pickups. It was difficult to find my tone with the stock pickups. Nobody I know was familar with the Alumitone pickups, so this purchase was a gamble. First I want to tell ya, the tone is very nice. I get real smooth lows and nice screaming highs with very little effort. I,m playing thru a Fender Super Champ XD tube amp and a Boss tube overdrive pedal. My tone is a cross between SRV and Robin Trower and I am very happy with my sound using these pickups. I also use a Digitech RP250 modeling processor for my home practice time. These pickups make that thing sound awesome which is saying alot. Second thing I want to say is these pickups are VERY quiet, almost noise gate quiet. I plug staight into my amp crank it up. Base on 8, treble on 7, voiceing on 2 (fender Baseman setting), volume on 7, and gain on 4. I get very low noise, I mean unbeleivable low noise. The neck and middle pickups give me a very smoothand fat tone, much smoother than fender stock. The humbucker at the bridge screams nicely. I could'nt be happier with thses pick-ups. The output from these is a little lower than the fender pickups. So you have crank up the amp volume a notch or two, but with the sweet tones I get, this is no problem at all. I did have to cut the lead wires the the guitar input plug because the plug on a Fender is a seperate cutout hole. No problem, just cut the wires, feed them thru the hole and wirenut them back together. Everything else was completely ready to go. It took maybe 5 minutes to install this thing, very easy. I'm definatley going to keep these and re-install them when I upgrade my guitars. If you choose to take a chance on these pickups, you won't be disappointed.


pretty darn cool

By jaztooth

from San Fran Bay Area

Comments about Lace Alumitone Pre-Loaded Pickguard S/S/H:

Truly beautiful to look at these pickups are absolutely noise free with very clear tone. All positions sound great. The neck spot is very good for jangly chording, while the 4 position (the key to stratophile)is really amazing. It has extra power compared to normal strat but still plenty of cluck. The guard is gorgeous,I picked the white perloid and put it on a vintage white!! Didn't know strats could be so elegant. Installation easy...just two solder connections (make sure you have room for a humbucker...if not you'll need a router) Pricey perhaps but well worth it!

Displaying reviews 1-3

Back to top

See All Lace Prewired Pickguards
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.