AT-LP7 Fully Manual Belt-Drive Turntable

Audio-Technica knows how critical a cartridge plays in reproducing high-fidelity audio from vinyl. The AT-LP7 is a fully manual, belt-drive turntable designed around the VM cartridge line, incorporating the finest materials and structures in support of the cartridge’s performance. The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and .3 x .7-mil elliptical bonded stylus. That stylus can be replaced with any of the six VM styli, so users can upgrade the stylus without buying a new cartridge.

The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. It includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges.

The turntable chassis is constructed of 40 mm-thick MDF. MDF is an excellent anti-vibration damping material that limits low-frequency acoustical feedback. The anti-resonance platter is made of 20 mm-thick polyoxymethylene. It is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33 1/3 or 45 RPM.

The AT-LP7 includes a built-in switchable phono/line preamp for connection to components with or without a dedicated phono input. It also features a selector switch to designate operation with a moving magnet or moving-coil cartridge.