SkyBox EXA Wireless, Cordless W-DMX RGBAW+UV LED PAR Wash Light

This compact, box-shaped LED PAR fixture is loaded with features and packs an impressive punch, thanks to its array of potent 15W LEDs. You’ll enjoy smooth color mixing, dimming—all with the ease and freedom of completely wireless operation.

The SkyBox EXA boasts seven high-output, 15W RGBAW+UV LEDs, which deliver bright, vibrant light with richly saturated colors. With that much power at its disposal, the SkyBox is up to a wide range of challenges, from small stage lighting to accent uplighting in a large venue with high ceilings.

The SkyBox EXA boasts a built-in AnyFi wireless DMX (W-DMX) receiver, and an internal lithium-ion battery system, all while maintaining the same features that made the original HotBox and RokBox series fixtures so popular!

The SkyBox EXA features 6/7/8 and 11-channel control modes which means it works great with any type of controller, especially our very own Kontrol 6 Skywire DMX controller with built-in wireless transmitter. Plus, the built-in 4 character/4 button LCD control panel allows total control over the fixture, including master/slave, auto mode, fade, strobe settings, manual color adjustment, sound active mode, wireless settings, IR remote control mode, and power output mode settings.

There's handy new features built into the SkyBox EXA's Lithium-Ion internal battery system which allows the user to select one of 3 power output mode settings. Depending on the needs of any given application, you can select either High Power, Medium Power, or Battery Saver Mode, which allows the fixture to run for a longer time at lower output. With average usage of color fades in High Output Mode, you can expect the battery life to last up to 10+ hours, color jumping 5+ hrs, or full on for 3+ hrs. Need more time? Just switch over to one of the other battery power saver modes! The normal battery recharge time is 4 hrs, and can be done even while in use.

The fixture also features built-in PowerCon compatible AC power In/Out connectors, 3-pin DMX in/out connections, a main power switch, and an LED illuminated battery power gauge which illuminates red during charge, and green when fully charged. These are all strategically placed on the back of the unit in a way that allows you to use it in ANY position, including flat on the floor!

Then for the ultimate in ease of setup, this fixture has a built-in AnyFi 2.4 GHz wireless DMX receiver, which can flawlessly receive either Skywire or W-DMX wireless DMX signals.