test Skip to main content Skip to footer
Save up to 15% With Coupon Code: SALUTE2018
Call our Gear Advisors (877) 509-9963 Hablamos Español
MF MD HG01 Memorial Day Deals 05-20-18

Electro-Voice MA-1206 Mixer/amplifier

  • Write a Review
Product 472576
Product Price $0.00
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

MA-1206 The Electro-Voice MA-1206 is a 60-watt, twelve-input mixer amplifier designed for commercial sound applications. It features twelve separate...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
Don't Forget


The Electro-Voice MA-1206 is a 60-watt, twelve-input mixer amplifier designed for commercial sound applications. It features twelve separate input controls which can be used to adjust the level from any of 12 input sources.
Input channels 1-10 are designed to either be used as low-Z balance microphone or line level inputs. The combination connector on inputs 1-10 permits use of either XLR or 1/4" input connectors. The block diagram shown in Figure 2 outlines the signal flow for the MA-1206. A signal appearing at either input 1 will automatically mute the other channels unless the mute function is defeated via a switch on the rear panel.
Inputs 11 and 12 are for auxiliary line-level sources such as tape or CD players. Mono or stereo signals may be applied to inputs 11 or 12. The left and right components of a stereo signal can be applied to the dual RCA phono jacks of these inputs and mixed together to drive the builtin monaural power amplifier. A rear panel paging input with gain control is provided for the paging output of a telephone system. An audio signal appearing at this input automatically mutes all other inputs. A preamplifier output jack and power amplifier input jack permit the mixed output to be fed to an external signal processor (graphic EQ or compressor), and then returned to the built-in amplifier. The preamp output may be used to drive an additional power amp with its own set of speakers without interrupting the function of the built-in amplifier.
There is also a 24v dc power option to operate the unit off of a 24v emergency power source. The speaker output is available at a barrier strip, which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70.7 or 100 volt distributed systems.

  • Auxiliary: 100 mV to 1 V/ (unbalanced)
  • Dimensions (H x W x D): 13.3 cm (5.2 in) x 48.0 cm (18.9 in) x 32.0 cm (19.8 in)
  • Frequency Response: 50 Hz - 15 kHx, ± 3 dB
  • Input Sensitivity/Impedance, Inputs 1-10 Line : 75 mV/47 kohm (balanced)
  • Input Sensitivity/Impedance, Inputs 1-10 Mic: 0.3 mV/600 ohm (balanced)
  • Line Output Leve/Impendance, Balanced Line Output: 500 mV/47 kohm (unbalanced)
  • Line Output Leve/Impendance, Preamp Output: 1 V/1 kohm (unbalanced)
  • Line Output Leve/Impendance, Speaker Outputs : 4, 8, 16 ohm, 25, 70.7 and 100-Volt
  • Net Weight: 9.0 kg (19.9 lb)
  • Paging: -20 dBm/600 ohm (transformer isolated)
  • Power Amp In: 1 V/10 kohm (unbalanced)
  • Power Dissipation: 250 Watts
  • Power Output (@ 1 kHz): 60 Watts
  • Power Supply: 108 - 132 V ac, 50/60 Hz
  • Protection: 3 independent Slo-Blo fuses, primary ac and dc
  • Signal-to-Noise Ratio, Auxiliary: > 65 dB
  • Signal-to-Noise Ratio, Mic: > 52 dB
  • Signal-to-Noise Ratio, Paging: > 65 dB
  • Signal-to-Noise Ratio, Power Amp In: > 90 dB
  • THD (at rated output): <1% at 1 kHz
    Tone Controls, Bass: ±10 dB at 100 Hz
  • Tone Controls, Muting: 40 dB attentuation
  • Tone Controls, Treble: ±10 dB at 10 kHz
See All Electro-Voice Powered Mixers
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.