- Back to Top
- OverviewJump to Overview
- FeaturesJump to Features
- WarrantyJump to Warranty
- ReviewsJump to Reviews
Electro-Voice RE2-410 Wireless System with RE410 Handheld Microphone
- Write a Review
- 270375 000000000 270375000000000
- Free Shipping (48 Contiguous U.S. States)
The RE-2 Series Wireless Microphone System brings sophisticated professional features to an affordable price point. It includes the RE-2 Receiver and...Click To Read More About This Product
6-Month* financing available.
The RE-2 Series Wireless Microphone System brings sophisticated professional features to an affordable price point. It includes the RE-2 Receiver and the HTU2 handheld Transmitter. The RE-2 is a completely programmable frequency agile system with one-touch Auto-ClearScan, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features.
The HTU2 handheld transmitter in this package comes with the RE410 Microphone element. It is housed in a rugged high impact ABS plastic handle One button on/off/mute button makes the HTU2 easy to use and the smart battery feature makes it easy to maintain.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Controls: On/Off, Set, Up, Down, Audio Line Level Output
Displays: Group/Channel, Frequency, Diversity, AF meter, RF meter
Connector Type: 1/4" unbalanced
Connector Type: 3-pin XLR
Antennas: External 1/4" wave detachable
Audio Frequency Response: 50Hz - 15kHz +/- 2dB
Distortion (@ 1kHz, 40 kHz deviation): < 1 %
Diversity: Digital Posi-Phase True Diversity
Dynamic Range: > 100 dB
FCC Type Acceptance: Approved under Part 15
Number of channels: 1112 possible (programmable in 25kHz steps) per band
Squelch: Tone Code plus Amplitude
Case Material: Steel
Dimensions (HxWxD): 43.7 x 190.5 x 150 mm, (1.72" x 7.5" x 5.91")
HTU2 handheld transmitter with RE410 Microphone Element
Displays: Group/Channel, Frequency, or Battery Level
Antennas: Internal 1/2 wave
Battery Life: 8 hours with Alkaline typical
Mic Type: Handheld
Power Requirement: 9V Battery
RF Output: 5mW or 50mW selectable
Case Material: High-Impact ABS
Dimensions (Height X Max Diameter): 268 x 52 mm, (10.55" x 2.05")
Microphone Applications: Female Vocal, Jazz, Male Vocal, Rock, Speech
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions (Opens in new window) for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.