Skip to main content Skip to footer
Financing available on 100+ brands. Get Details
Call our Gear Advisors (877) 509-9963 Hablamos Español
MF MD HG01 Electric Guitar Month 06-19-18

Event 2020BAS v3 Active 250W Studio Monitor with 7.1" Woofer and 1" Silk Tweeter

  • Write a Review
Product H79005
Product Price $0.00
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

The 20/20BAS V3 retains the character of the original EVENT 20/20 series, while incorporating massive acoustic performance advancements achieved over...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
Don't Forget

The return of Big Ass Sound

The 20/20BAS V3 retains the character of the original EVENT 20/20 series, while incorporating massive acoustic performance advancements achieved over years of additional research. EVENT has designed and implemented an amplifier based on the topologies found in its flagship Opal monitoring system that delivers dramatically lower distortion artifacts, high dynamics and increased output.

The 20/20BAS V3 has much a lower distortion floor than many other studio monitoring systems, providing higher dynamic range, which is maintained as the output level is increased. This behavior is due to the incomparable
œsoft clipping nature of the 20/20' Class AB topology; audio playback is unfettered and remains unmasked by the distortion and inter-modulation artifacts produced by less sophisticated amplifier designs.

Fully discrete Class AB amplifiers for the tweeter and woofer provide up to 250 watts of burst power with less than .01% Total Harmonic Distortion (THD). This more than doubles the power provided by the original 20/20bas amplifier design with less than half the distortion. Sustained high output performance is ensured through a new oversized toroidal power supply that can ensure sustained extreme low frequency reproduction.

  • Two-way front-ported speaker
  • 7.1" Woofer
  • 1" Silk Tweeter
  • Class AB amplifiers
  • 250 watts of burst power
  • Less than .01% Total Harmonic Distortion (THD
  • Two year manufacturer' warranty

A new generation of clarity, transparency and definition. Order today.

  • Frequency Response: 35Hz - 20kHz ±2dB
  • Crossover Frequency: 2300Hz
  • 3rd Harmonic Distortion @ 90dB SPL, 1m, 500-7kHz: 0.08%
  • 3rd Harmonic Distortion @ 90dB SPL, 1m, 200 - 20kHz: 0.2%
  • 3rd Harmonic Distortion @ 90dB SPL, 1m, <200Hz: 1.5%
  • Acoustic Output - SPL @ 1m, Long term (80Hz - 20kHz): 105dB
  • Acoustic Output - SPL @ 1m, Peak (80Hz - 20kHz): 108dB
  • Signal Input: XLR, RCA (balanced/unbalanced)
Low Frequency Transducer
  • Piston Diameter: 180mm (7.1")
  • Voice Coil Configuration: High temperature single coil
  • Voice Coil Diameter: 38mm (1.5")
  • Former Material: High-strength Polyamide - Glass Fiber
  • Magnet Type: Ferrite
  • Cone Type: Mineral Filled Polypropylene
  • Magnetic Shielding: Bucking magnet and steel cap
High Frequency Transducer
  • Dome Diameter: 25.4mm (1")
  • Voice Coil Diameter: 25mm (0.98")
  • Magnet Type: Ferrite
  • Dome Type: Silk
  • Gap Design: Ferrofluid Cooled
  • Magnetic Shielding: Bucking Magnet
Amplifier - Low/high frequency
  • Frequency Response: 20Hz - 20kHz(±0.2dB)
  • Operating Band Pass: 20Hz - 2400Hz (LF)/2400Hz - 20kHz (HF)
  • Total Harmoic Distortion: 0.01% 120 Watts into 4 Ohm Load
  • Long Term Power @ 4 Ohms: 80 Watts
  • Burst Power @ 4 Ohms: 120 Watts
  • Output Topology: Class AB
  • LF Trim: Constantly variable ±3dB
  • HF Trim: Constantly variable ±3dB
  • Subsonic Filter: -3dB @ 30Hz
  • Driver Protection: Current Limiting
  • Temperature Protection: Thermal Cut-Off Switch
  • Indicators: Event badge 'On' mode
  • Cooling: Convection - Aluminium Heat Sink
  • Power Requirements: Voltage selector 110-120V or 220-240V, 50/60Hz, 180VA; Power via detachable 3 circuit IEC type linecord
  • Cabinet Construction: MDF
  • Low Frequency Vents: Front Port
  • Cabinet Dimensions: 260mmW x 375mmH x 300mmD; (10.2"W x 14.8"H x 11.8"D)
  • Cabinet Weight: 17kg (37.48lb)
  • Shipping Dimensions: 375mmW x 495mmH x 415mmD ; (14.8"W x 19.5"H x 16.3"D)
  • Shipping Weight: 19kg (41.88 lb.)
Questions & Answers View All

Review Snapshot

by PowerReviews

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top

(0 of 1 customers found this review helpful)


Event Electronics Kicks Badman Sound


from Ontario, Canada

See all my reviews

I love Event Electronics products. I currently own a pair of Event ASP8's - that look design wise very similar to the new 20/20 BAS series. My guess however is that these updates are better than what I am working with currently. I've heard alot of monitors over the last few years, mackies, jbls, major brand monitors and yet there's something very comforting about coming back to my Event's. I know that when i work on a mix with Event monitors im going to hear in my playback what I heard on my Event's. They definitely help me to dial in specific frequencies for a specific guitar part of vocal track. I have had several people come to my studio in the last few years and even though im running the older model people always leave impressed with my Event monitors and say to me "Wow those speakers sound very good." If your looking for a new monitoring system do not be fooled by major brand speakers, and honestly for $1000 for a pair - its one of the best investments you will make. Let the speakers do the talking and let your ears hear a world of sound you didn't know existed. Event 20/20 BAS monitors will be my next purchase!

Displaying review 1

Back to top

See All Event Powered Studio Monitors
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.