MV12/6 12-Channel Rackmount Mixer

The MV12/6 is a 12-channel, rackmountable mixer designed for maximum ease and flexibility both when installing and mixing. The connector panel can be mounted on either the rear or top side of the unit, allowing installation in places standard mixers won't fit.

Channel controls
All channels feature a 3-band EQ; two auxilliary sends (one switchable between pre-/post-fader modes); effect send; bus switches for routing group 1/2, group 3/4, and stereo outputs; and a channel fader. Each channel is also equipped with a 44dB gain trim, peak LED, and pan pot.

Installation
For maximum installation flexibility, the MV12/6's connector panel can be routed to any of the four group or stereo buses for a maximum of six independent outputs. Group 1/2 and 3/4 buses are equipped with TO ST (To stereo) switches that send the signal to the stereo bus when engaged, or keep the signal independent of the stereo out signal.

Built-in digital effects
The MV12/6 offers a 16 effects programs to choose from. The selected effect can be applied to the stereo out signal as well as the group 1/2 and 3/4 signals. The stereo out signal can be further processed with the built-in 7-band EQ. The MV12/6 also allows the return signal to be routed independently to the group 1/2, 3/4, and/or stereo buses.

Inputs
Inputs 1-8 are all equipped with both XLR and Euro-block connectors for quick, easy, and flexible connectivity. Channels 1-8 also provide independent phantom power switches. Channels 9/10 and 11/12 are stereo input channels with both RCA and Euro-block connections.

Outputs
The output section's stereo out, group out 1-4, monitor, and mono outputs also utilize Euro-block connectors. XLR jacks are also provided for the stereo out. Group out, Aux 1/2, effect, and return jacks are all 1/4".